| Subject | Text |
| First of all... Hello to all the Googlers who have been searching for a solution to the same problem |
| User Manual Sansui AU 6500 - AU 9500 - TU 7500 - TU 9500 | I can share with User, Service, Workshop, Technical Manuals: Hi-Fi, Cameras, Camcorders, Cesna, Appl |
|
|
| i should certainly check the soldering in lopt stage ie flyback transformer line drive tranformer an |
| Re: PX-50XM1 | Thanks Mike,
I just added a few more pics and video plus an email.
Chris
[quote:a3f32 |
| NEC 50 mp1 half screen problem | I am hopeful that someone in this forum can help me. I have 2 plasma monitors (50 mp1) I bought a y |
| I have the FSP228-3F01 that is also dead, my C33 looks fine but C20, 21, 22 and 28 are about to pop |
| manual for philips PM3055 | Can anybody give me (sell me) the user manual of the Philips scope PM3055?
If it can be in PDF or o |
| Beko chassis 12.1 tuning doesn't stop | Found out a little more. The I2C bus controlled Video Processor chip has an output registor read, du |
| Schematics for JVC AV-27820 TV | This TV lost its vertical scan. Does anyone have a schematic for this TV so I can fix it?
Thanks |
| Vista does not allow the upgrade to Windows XP (as opposed to may).
Make sure you do not have data |
| You said white line in center, of this is down the middle then it's a line scan, usually scan correc |
| Re: STR-DB725QS | [quote:80f4106bc9="onkel.tom"]Hi Andreas
Have the servicemanual you need.
Check the solderpoints |
| Beko 12.1 chassis tuning doesn't stop on strong signals | Hi all,
This Beko 14213T (chassis 12.1 with UHF only) just continues to scan over all signals. Chan |
| Re Finlux 1000 | I had the same problem about 3 years ago with this model.
Check continuity of line scan coils..shou |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| Picture squeezes horizontally | Make and model of set would normally be required for more detailed diagnosis.
With the set unplugge |
| Hi have a look at this link download/open the pdf file here-:
http://www.s-manuals.com/smd/bc
I |
|
|
| Mag 810FD too bright | A hand-me-down from a friend. The monitor is too bright and adjusting brightness and contrast can't |
| Re: 50MP1 | I have acquired 4 NEC 50 MP1 for free. They all pretty much have the same problem. They will displ |
| hola yo tengo el manual de aiwa wx 220 si alguno lo necesita lo puedo escanear en su idioma scxslot@ |
| PX-50XM1 (50MP1) | All,
Just so you all know, below are the pcb labels from the scan board of the 2 capacitors which |
| the set has dry joints, try resoldering the line output and drive areas of the tv, also on those set |
| If the powersupply is not normal it generates a reset signal to the processor.
Go into controlpane |
| Toshiba FC22 Copier Problem | We have a problem on our hands and I need some help.
First of all, let me say, I'm not a copier r |
| Can you get to the B.I.O.S. screen and does it stay on?
Try booting into safemode, press the F8 ke |
| 4 flashes is no vertical sync, check ic501 and related parts, it may also be worth resoldering the r |
| Repair to a 11ak19P4 chassis, goodmans widescreen | I have 2 wide screen Goodmans Tv set that have the same fault.
The TV powers up and comes on when |
| [quote:6a60d01696="Anonymous"]It's most definitely a connection problem in the filament circuit for |
| It's probably faulty capacitors in the vertical scan. First overview would be to visually locate an |
| The datasheet for your component is here:
http://www.alldatasheet.co.kr/datasheet-pdf/pdf_kor/TOS |