Subject | Text |
Re Finlux 1000 | I had the same problem about 3 years ago with this model.
Check continuity of line scan coils..shou |
NEC PlasmaSync 4210W | I guess this is your lucky day, or maybe not. The reason your plasma unit keeps going into protectio |
|
factory settings | How do you put the Sanyo CE27LD3 - B back to the factory settings?
I have just bought this set and |
50MP1 | Hello Stiff,
Yes these are 100% fixable, each fault plasma will require 2 SMD capacitors removing |
trouble | How can you scan the TV so you can setup the television programs with this remote?
i am founding |
manuals and IC's | Do you have a service manual and anything else for Pioneer DEH-45DH? Also TA8205AH & TA8273H IC |
Vintage Pioneer Amplier SA-500 Repair HELP!!! | I have a vintage SA-500 pioneer amplifier that was not outputting anything out of the left channel. |
Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
PX-42VM3G | Hi Pinkwell,
I have just recieved an email back from the AGM of NEC Europe, he has confirmed that |
Onida 21" KYThunder Tuner problems | Before going into the problem, Following is the specification of myTV
ONIDA Purchased on july 200 |
| If the powersupply is not normal it generates a reset signal to the processor.
Go into controlpane |
| IF THE LINES ARE VERTICAL IE TOP TO BOTTOM THEN VERT STAGE IS OK AND FAULT IS IN LINE, UNUSUAL TO GE |
mfc8840d | hi everybody, I have a scan lock readout and it is physically unlocked. no functions possible excep |
| Gary I have checked around IC501 and it seams ok. Can you tell me where the Scan coil windings are s |