Subject | Text |
Convergence problem | I have a convergence problem before and I replaced both cirucit stk392-120. After I replaced I do no |
| [quote:3483673c86="whogoesthre"]electrolytics in the power supply but they look fine, no bulging top |
|
technics receiver sada10n | i have a technics receiver model #sada10n. when listening to any analog signal (including radio) the |
KDS VS-21 Monitor Schematic .. or some help with OV circuit | My KDS 21" monitor is actually the kiosk version of the VS-21. No difference as far as I know. |
| Yes, the F fuse is a fast acting fuse which is supposed to blow before damaging silicon devices like |
Infinity TSS-450 5.1 Surround Speaker System..diagnosis help | Hello,
I recently bought this set of speakers at a yardsale...
Infinity TSS-450 5.1 Surround Speak |
| TDA836xx (circa 1994) series TV processors were designed and aimed for analog television---way befor |
| [quote:72c29cb2cf="jjcool"]would you say its the main av board fault or a t-con board fault?
than |
| When you say. "digital setup", remember that music that you listen to, is and always will |
siera sa21u | salut au membres,mon probleme que la led temoin clignote sans arret,j'ai changé les pieces gril |
| Speakers and wiring are good. The distortion is there regardless of input - whether internal (tuner) |
No image on CRT. Please advise... | Guys, I need your help :cry:
I have a Hitachi CM776ET CRT Display.
Since a week ago it started g |
| i was reading that for testing mosfets here
http://www.uoguelph.ca/~antoon/gadgets/mostest.htm
|
PX42VM3G | Hello Pinkwell,
I had a great christmas thank you, hope you did also.
The NEC part number you |
PANASONIC SERVICE MANUALS | PLEASE I NEED ANY SERVICE MANUAL FOR Panasonic analog or digital copier if some one can help me plea |
problem of horizontal | hello every one , i a have vetel tv chasis 11ak30ak stv2246h as analog processor and st92195c3b1 as |
| Hmmm. This could be a pain in the arse, but maybe not. It is possible that there is a missing low vo |
|
Need suggestions of multitest units like the elenco mx-9300B | Incase no one knows what this unit is, http://www.esssales.com/elenco/all-in-one.html
I need a te |
| Thanks for the reply!
I do no thave the schematic, and wasn't able to find it on this site. Howev |
| Resistor can not short? Perhaps you meant to ask how to check for an open resistor?---easy ...your |
code radio | Bonjour,
Après avoir changé la batterie de mon véhicule mon autoradio ne fonctionne |
| Which transistor blew? Was it a main output transistor or smaller one in the pre-amp stages? Why did |
dvd power suply problem | dear cam,
from ur observation as transforemer has 8 pins on each side,power supply appears to be |
| [quote:1c2dcfd480="Anonymous"]Thanks for the reply! Yes, it does make a clicking sound when turning |
Microscope | I'm looking for a microscope good for inspecting solder joints on surface mount components. It has t |
| the early teletext module's on the 42WH18B are very unreliable and go faulty for a passtime .... in |
problem solved! | A friend of mine borrowed me a HDD. After mounting it, I noticed the problem couldnt be a faulty HDD |
check | if you have a multimeter ...check the output voltage ot the adaptor... be shure for right connection |
| Thanks for that, is it safe to test the 12v and 35v circuits with a multimeter? Im not going to get |
| The Vcc is +/- 36V DC which gives me a reading of 72V on the multimeter. Am I correct or not? :D |