| Subject | Text |
| Screwed up previous post
Electrolytics are 16V
The display is
Arlight R&D Ltd.
NXT-402 D |
| Also replace all the 22uf/16v, 2.2uf/50v, 1uf/50v caps. |
|
|
| Thanks! Bad news on all fronts then.
It's actually a VoIP phone I need the PSU for.
I have to |
| REMOTE CONTROLLER REPAIR | The remote control for my LG Model DR6621W was not funtioning so I opened it and found that there is |
| Other ideas | cp120 220mf at 35v cp150 2200mf at 16v cp110 220mf at 200v cp114 220mf at 35v check/replace all thes |
| Goodmans GHD1621F2 GHD2521F2 PVR Hard Drive Fault (Ticking) | Just fixed my uncle's GHD1621F2. Symptoms were that it 'couldn't find' the hard drive - the system |
| [quote:49d50c52ff="gary"]change c14, c14a (2200mfd 10v) c18 c19 (1000mfd 16v)in the psu, if that doe |
| Minnie-Quick Question Before I Do Repair On Mitsubishi VS507 | Hi Minnie- TV worked fine for a month now it has a little different problem. The set comes on sound |
| Sony CDP E200 monitor help | Sorry about the multiple posts, I accidentally put this in the wrong forum.
Hi,
I hope there is |
| New problem with Vs-245s | Hello,
The FR310 fuse deads when I power on the VCR. Any solutions....This fault is here since I'v |
| jts1957,
i solve the problem. it was a capacitor at the deffirential amplifier. capacitor get le |
| panasonic NV-FS200/fs90/88 G deck? | Hello
Can somebody help me to explain this:
Int fine horizontal patterning
Check C3311 (10uF, |
| found a swollen cap. | Ok Got the next swollen cap, C520, a 10000mf 16v cap on the main board.
That cap gets AC from the |
| Re: wiring diagram Opel Omega B (X30XEV) | I'm sorry: X20XEV !
Omega-B, 2.0, 16V, X20XEV, to 1999. |
| :) :D :D :D yes finally it's done... i first changed all the surface mount 100uf 16v and 100uf 6 |
| Check out why the manufacturer has chosen to use an expensive solid tantalum capacitor in that posit |
| This worked fine for me from start to finish. The top half of the picture would go black after a fe |
|
|
| C531 470mfd 16v is usually the culprit. The cap dries out and eventually it wont start at all. Super |
| Re: 42" digistar plasma screen | [quote:0786074833="rushman"]I have a digistar model 4210D, it takes 5 0r 10 minutes for the screen
|
| AE1 chassis | At the verticale PCB where the tuner is mounted,remove the IF module,open it and resolder the IF coi |
| Resetting a vauxhall car alarm | Hi i have a 1999 vauxhall astra 1.6 16v cd and was wondering if anyone knows how to reset the alarm. |
| MX70BK | If your JVC AX-MX70BK amplifier isnt working / starting and no red standby LED is shown. You have to |
| [quote:eacd3436c9="Anonymous"]hi,i don't know if this information is of any use as i am new to forum |
| William I got mine fixed. I will try and walk you through the process.
I recommend having a power s |
| Hi,
Just repaired a ProLite E481S and thought I would pass on the details.
Fault:-
Blank display |
| I tested it in-circuit and the results I got are 4.91 V input and 3.26 V output.
The small capac |
| Ok so I have been dealing with ALOT of these. I buy broken TV sets and fix then re-sell
Viewsonic |
| model 5700 (infocus) | Could anyone tell me if the 100uf cap that is right inside the heatsink is listed as c16 and is a 16 |
| Help with my Half Screen on 50" NEC PlasmaSync MP1 | I need - help can you send pictures to [email protected]
[quote:b6b800d6e2="Anonymous"]Wil |
| CS19 220UF/35V
CS20 220UF/25V
CS21 1500UF/16V
CS22 1500UF/16V
CS23 1000UF/25V
CS27 1000UF/25V
|