| Subject | Text |
| Mitsubishi VS-6017R No Pic | My Vs-6017r projection tv won't display anything on the screen. The audio works fine. The menu won't |
| Testing the circuit is to be done with the power off!!
Do not apply power until you are sure you ha |
|
|
| [quote:e40f70a156="Anonymous"]Yes, have test equipment.
It's old relatives TV. Just wondered if |
| Electronics parts for TV VCR AUDIO closing down | I HAVE CLOSED MY TV REPAIR BUSINESS AND AM SELLING ALL MY SPARE PARTS, MANUALS(200), VCR & AUDIO |
| I think its the diode in seires with the fuse, when i test the diode one way i get 0V and the other |
| Thank you very much for schematics. But I was also looking for service manual (the one where are des |
| I guess you need to begin with why you are troubleshooting an amp circuit. If the fuses are already |
| LCD monitor switches off immediately after turn-on | Hi,
please help me with this one if you can.
I've got a no-name 17" LCD monitor that displays |
| Dell Ultrasharp Flat Panel, almost no image/brightness | I have a dell flat panel monitor lcd that has no brightness to the image. If i look at the monitor u |
| Right, lifted the anode of D812 of the +14V line that also goes to a 7808 regulator for the +8V supp |
| Thank you very much! I wasn't sure I'd ever get a response that would help. :) If I could I just wan |
| philips monitor#201B10/00,fcc id:A3KM094 | Hi can anyone tell me where to find a schematic for philips model 201B10/00 20 inches monitor, i nee |
| still having problems | when i first started testing the transistors one three blocks down from where i was testing blew out |
| Just found the Main Power Board schematic.
[url]http://monitor.net.ru/forum/files/usp490m-42lp_ |
| Smartmatic | Founded over a decade ago as a research and development group specializing in systems integration, S |
| ### URGENT EPSON R210 REPAIRS ### | I need help with this ASAP....
I set up printer as per instructions on the Epson site. Went to pr |
| My 4040 has following problem | Hallo Thorbjörn (OR ANYBODY ELSE),
I saw you were looking for a stabilock 4040 test set, eve |
|
|
| This monitor requires bot the H-Sync and the V-Sync to be the correct way up ie +ve going or -ve goi |
| try to flash it using twister flasher/ufs3/prodigy/neelix3/pbb or whatever box u choose.
if still |
| A good test would be to see if the relay gets smoked with the ignition on but the engine not started |
| Hi,
i fear you have damaged your player.
Before choosing that test you have to disconnect some cab |
| Plasma colours odd until it warms up | I have had what sounds like the same issue. I haven't had an LCD I couldn't repair yet, however I'm |
| You need to check the output transistors for shorts. Test the forward junction voltage drop with a m |
| THE REMOTES ARE INTERCHANGEABLE SO NO PROBLEM THERE, THE SERVICE SETTINGS ARE UNIQUE TO EACH SET SO |
| papers for a JVC Color service Monitor | Hello folks,...I am looking for any assistance here from you tech. buffs out there on a JVC Color Mo |
| thx for the info, I did some more research: the BU808DF seems to be a Line Output Transistor (LOPTR |
| Press the 'test' button on vcr and 'menu' on remote. You can get to 'test' button with front removed |
| Advantages of FADOS7F1 | Advantages:
Output voltage degree of multimeters are very low. FADOS7F1 has various voltage deg |
| MITSUBIBHI SHUTDOWN | HELLO. Well KIKI the first thing that comes to mind is even though the tubes were replaced there had |
| enclosed pictures | The 1st time the replacement transistor was fitted the insulating washer must not of been fitted cor |