| Subject | Text |
| I also got a problem with PM-4230 Orion Plasma screen (not a TV) . It is called PLAVO (not VISION). |
| [quote:61dd7c8f2c="jon R"]Thx anyhow, yes i followed the flowchart religiously and all the supplies |
|
|
| Thanks for the reply gary. That's what I thought and it sucks :( I had another screen that is the sa |
| Re: suite | [quote:03384cab1a="Valdek"]Now I got a working solution which include the 4.9.1 DAS software ( most |
| I need service manual for SONY MHC-WZ8D. Please! | Does anybody have SONY MHC-WZ8D full (with schematics) service manual? Where can I find it? Please m |
| Re: Vestel 11AK45 programming | [quote:718ecfd048="jeffsm7"]How do I enter the programming mode in the 11AK45 chassis? I have a fram |
| Sounds like the power supply may be bad. I can't find any info on that model. Contact LG to see wher |
| Re: Another question | [quote:de20e5c1d6="Anonymous"]Sorry to sound dense - but the panel - is that the screen itself (and |
| I have bad experience with this PDP. Usually is bad PDP module |
| sony 2553 big problem ,funny pepole heads | my sony have a strange problem,i have a white line on the tv in the middle ,the upper picture shows |
| SONY KP-61HS10, 61" TV, streched image | I have a problem with my Sony KP61-HS10 big screen TV. Picture is slightly streched to the right sid |
| Re: sony cmt cp101 low audio levels | Hi can someone tell me exactly what you have to do to fix the sound problem on the CP101 sony, I ha |
| Bad PDP. |
| Philips Plasma tv with Samsung PDA | I am have problems locating a manual with circuit diagrams for a plasma Plililps 42 PF9966/37 using |
| Panasonic TX-32PX10F Service 2 hex option descriptions? | Hello!
Does anyone have descriptions for Panasonic TX-32PX10F (32" 16:9 100Hz tv) Service mode 2 |
| Isn't this the one:
http://www.eserviceinfo.com/downloadsm/1954/Philips_A10_TV%2028PW6515.html
|
| Need service manual/schematics for RCA f31632et ctc187chass | A friend and I are working on a television together, and would like a nice set of schematics or a fu |
|
|
| No sound at low volume | I'm not familiar with that particular, but I would say if it's a 1987 model
it's probably safe to s |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
| In fact, I've bought this unit as faulty because I already bought one a few times ago and I've repai |
| hi minnie i have made a video to show you fault better
[url]http://www.youtube.com/watch?v=AKus6 |
| If you have no picture but sound, 24 volts going to the panel and the 5 volt inverter on, bad panel |
| Philips #27PT6441/37 Will Not Turn On! - UPDATE!! | I finally took it in to a shop for repair and saw [b:2d120d15d9]FOUR[/b:2d120d15d9] sets JUST LIKE M |
| ServiceManual Philips VCR DeckTurboDrive VolumeQueen.part3 | Can someoneprovide me with the full service manual for the above VCR please, this archive seems to b |
| 50MP1 blank screen with backlight, green light stays on | Hi Plasma TV experts,
I have a 50MP1 that powers on, there is one bright color line show up on t |
| z-sus | Hi,
The IC itself has no printed anything.On the cooler are some numbers like
4921qp1002b,second l |
| what type of pdp is fitted in the unit, for some lg plasmas there is a repair kit consisting of both |
| If the radio is running the battery flat, you must not use that Fiat very much (or unit comes on at |
| Hi to you all newbee on forum would like some help please | Depends on the use but I would use a pulse width type like the one in the link below as the D.C moto |
| thanks for the replies folks ill give a full run down. last night was playing ps2 via scart 3 front |