| Subject | Text |
| Just some more information on this fault. I did some tests and found its actually a speaker fault wi |
| AKAI s900 power supply | hi
i am trying to repair an AKAI s900 sampler.
basically there are two main boards, the voi |
|
|
| Common problem with Sonys is the IF module, small metal box usually close to the tuner. Check solder |
| zenith sy3272dt 32" | i have this box and it will not power up. it has alot of burnt and mia parts on the ac power sectio |
| Just a quick update. I haven't got all the spares yet but happened to have a 16v 220uF in the parts |
| NationalVCR NVG7A Service manual & circuit and data shee | Thanks Gary for the suggestions.
I removed the psu unit and it tests OK.
So I'm a bit lost without |
| Yes, its actually a green light (you guys are techs, so I thought I would be as specific as possible |
| Re: Outputs Transistors keep blowing - NAD 7225PE | [quote:557f74fd31="Bunyip"]Faulty NAD 7225PE => Output transistors, Driver Transistors and a fusi |
| Hi. Sorry for the delayed respone.
Full model is 30PF9946/79
There is also a black 'box' with [ |
| Older big screen with no controls | we have a 3rd gen hand me down big screen. It's got a lot of mileage on it and was never a great TV. |
| what does "Check Printer" flashing on monitor mean | Normally when a computer first powers up it self tests internal and external devices and if a commun |
| Found the PIP | Hello eddwhatley,
I found the PIP module finally. Pulled it out and between/around c7034, c7038, |
| It tests good but to be sure i replaced it with a 470uf at 250 volts and still nothing
mike |