| Subject | Text |
| [quote:1604229449="minnie"]I don't have an index out side of US models.[/quote:1604229449]
My hope |
| Yamaha RS-232 Interface Spec? | Does anyone have a command sheet or at least a connection specification (baud rate, etc.) for Yamaha |
|
|
| Mustek R100A DVD Recorder power supply voltage high | Hello everyone,
Recently, I cheaply acquired a rebadged Mustek R100A DVD Recorder at auction, wel |
| Phillips inverter boards for sale | I have 2 inverter boards 6632L-0282A,6632L0283A that fit phillips,magnavox etc.37 inch lcd tvs.Ill s |
| Goodmans GHD1621F2 GHD2521F2 PVR Hard Drive Fault (Ticking) | Just fixed my uncle's GHD1621F2. Symptoms were that it 'couldn't find' the hard drive - the system |
| Trouble shooting systems | [quote:36d03f5807="Anonymous"]After 46 years servicing electronics, there is one thing that never fa |
| no, hv cap failure is also a possibility as is incorrect line drive but without knowing the exact mo |
| Here's a copy / paste reply to a previous post. Suck out any pertinent information you can use:
|
| waking-up dead lcd screen pixels | Someone mentioned to me recently that a computer programme is available that attempts to reactivate |
| Anyone Recognise LC320EUD-SCA1 32" Full-HD 120Hz LED Pa | I've embarked on a project to build an HD picture monitor (not a TV - no audio circuits; no tuners) |
| Horizontal deflection transistor | If mains fuse is OK, i assume that horizontal deflection transistor is short-circuit.
Is there an |
| I’m taking a stab at it from your symptom. R 5102 on all three crt brds opens. 120k ½ w. Common |
| That is not a convergence board failure. Better contact a Philips ASC for service. |
| THE AMP FROM HELL | HELLO, Well this sounds like a big no sound problem. Yes the IC's commonly refered to as the finals |
| Philips TV 21PT701A chassis GR2.3A | Set is dead, after power-ON no pic or sound, Frontpanel LED starts flashing at 1Hz rate after 5 seco |
| I got this message at another forum and the part I need help with is how do I go about measuring res |
| Re: N2751W and FSP212-3F01 or FSP212-3F02 | [quote:ba9afff45a="LamSV"]Hello,
Thanks to this forum, I repaired my N2751W. It broke down due to |
|
|
| Re: 37mf321d/37 | [quote:0580990249="Dan the Tv man"]Ive got a main board(scaler) Ill sell you for $100 plus flat rate |
| Hi Tec model: 17" PC monitor dead | I am engineer but new in repair
I have a Hi Tec model: 17" PC monitor
it is totally dead
th |
| Follow-Up to Above | Question for someone with TV repair knowledge:
The picture painted by the green CRT will occassio |
| Hi Ed,
I had a similar situation with a '70's Pioneer amp using similar NEC transistors. Over her |
| sharp tv repair lc-22l50m-bk | what is commonly failure low voltage power supply ? |
| Apex GB5108 | Sounds like you have a vertical failure. I'm assuming you mean the set set has 3 colored lines runni |
| KEF PSW 2500 relay buzz and audio outout buzz | Have just repaired a similar problem with a KEF 2500 - relay was chattering at 50 Hz rate, buzz in s |
| tv rating | please help how do you get the rating off these tv cant figure it out it like every channel the rate |
| Re: DC Power Amplifier | A square waveform involves high frequency components and at such low rate and high frequencies I won |
| Water and electronics don't go well to much... :(
After you let the unit dry, you can to try to |
| TCE CTC 187
NO HORIZONTAL SWEEP (CTC 187CL)
C4404 has probably blown up
Caused by an open C4403 |
| the set is fitted with the philips a10 chassis, over 99% of faults on this set are caused by failure |
| Picture squeezes horizontally | Depends on time spent but I would say in the U.K approx £50 total or $93 with current exchange |