Subject | Text |
TV DOES NOT COME ON | I have a Pioneer Elite PRO-100 that was turned ON and working. I left the room and when back the TV |
schematic - Pioneer | I need schematic for:
- amplifier: SA-310
- cass: CT-300
- tunner: TX-410
[email protected] |
|
PHILLIPS TV SPEAKERS | HELLO, To begin with the addition of speakers to a unit has to involve the understanding of the tot |
Re: fiat 500 | [quote:75b7d140f2="sadek1979"]proszę o kod do fiat 500
blaupunkt
BP638389523058
815BP63838 |
| Just use a switch with 2 seperate contacts.
e.g. a switch wich 2 * on-off-on connections.
e.g. |
| There are two causes for this failure:
1) Faulty tube, but most of the times two colors won't dis |
| Great tip, Chris.
Grtz Mark |
| Zener 6079 (9.1V) is shorted. R3045 measures 1.8 ohms.
If anyone else needs to know in the future, |
transformer smokes | I am repairing a power supply for a scientific instrument. When I recieved it, it would not turn o |
repair it | A short circuit is the most probable cause t o this problem,
I have the same problem with my KA-V75 |
sony kv28wt72 engliah manual needed | Hi!
I badly need a sony kv28wt72 manual my cable does not get all the channels
PROBLEM: my tv |
| Please check if there is a short in the high voltage circuit on the main pcb.
(probably a shorted h |
| Ohh, I don't think I can help you with which pin's are connected to what parts. You could try to sea |
| The numbers after the dash designate power
Check this:[url]http://fileshare.eshop.bg/download.php?f |
| Root Mean Square - approximately the music power |
Need circuirt for LG 775N CRT monitor | Power supply hiccups if LOT taken off B+ supply. |
Schematic diagram / service manual for Marantz PM 30 | i really need the schematic diagram and/or the service manual for the audio amplifier Marantz PM 30. |
|
Pioneer SA-408 | Please, I need schematic for Pioneer SA-408 amplifier. Could someone email me ([email protected]) |
| Thanks for the warning mark.
You are correct that this did lead me to a good path...perhaps the l |
| Old TV's have often bad solder joints.
Try to gently tap on some components (special the flyback |
| Hi Mark thanks for ur clear & wide advice, I realy appriciate it.
1st Item, I had power ok. |
Soundtech PC-1250 | Like to find Schematic/Service Manual for a Soundtech PC-1250 Powered Mixing Console. Tried the Manu |
| try to resolder terminals at the power supply section esp. high current devices. |
Humax F1 | Hi
I have a problem , that after shutting down the power supply the memory for all channal is gone |
sony STR-D365 | Hi I need a schematic for a Sony STR-D365 amplifier. If anyone can help me I would qreatly appeciate |
| turning it off and back on clears this up?
sounds like it may be a DCU problem (digital convergence |
| Hmmm. This could be a pain in the arse, but maybe not. It is possible that there is a missing low vo |
| There could be two failures:
1) There is a secondary short. (most of the times the PSU will make |
| Try to check the diode-bridge and main-switching-transitor/fet in the primary side of the power supp |
| Matt,
Well done in finding the diode! ;
Keep in mind, when dealing with switching power supplies, |