| Subject | Text |
| Projector alignment on the Mitsubishi VS-581R + Briteness | I have an old Mitsubishi VS-581 projection TV that still works but the brightness level is low and t |
| Sony CCtv CCD Board Camera OverVoltage DAMAGE 24VDC | Hi, i have 3 ez420ir-30 sony 4.3mm ccd cctv camera's which have been plugged into a 24vdc psu, they |
|
|
| MDX-M690 | Dont know if this helps, im sure you've probably sorted it out by now.
Looking at the PDF, the Am |
| need stepdown from 50v dc OCv to below 25vdc | I am upset, I ordered a solar panel and was sent a COMEPLETELY wrong panel from what i ordered, and |
| How on earth do I set this up? | Hi,
I have just come into possession of the following –
Sony SA-W305 and a set of 5 Sony speaker |
| Big screen tv's,in general. | I thought i hit a GOLD MINE one day-I looked outside in the a.m.,thought i was hallucinating...but n |
| onkyo tx-ds575x | check with your local service shop I have the same problem dsp board is shot!!! |
| power schematic for powersht G2 | I have a canon power shot g2 digital camera and i have broken one or the 9vdc in pins off so i canno |
| Re: Just fixed my first photocopier | Clean the fixdrum whit oil...
[quote:68afd613d1="absorbentgnome"]Got a Sharp SF-7300 out of a |
| What you want to make sure is the ability of the solar panel to provide enough current. Of course yo |
| Hey thanks for the reply, and Yes, I am still here :-)
The part I want to replace is in a TO-220 |
| Re: L32 won't turn on; yellow LED only | Has anyone determined which part is typically needed for an amber light, but no power on? I've seen |
| Blue & red flecks in VHS image | Greetings everyone! I've seeked out this forum to see if any of you all can help me with a VCR prob |
| thanks so much, i will give that a shot and see what happens. if anyone else could chime in that wou |
| Li ion charger type Elite Electronics China HP8204L1(4S) | This is a 12v 6A max lithium ion battery charger. I need a circuit diagram of the unit so that I ca |
| Variable powersupply SKYTRONICS 650.682 | Hello,
I have a 0-30V, 10A variable powersupply (SKYTRONICS 650-682) with following problem:
|
| Sony CPD-G520 21" CRT monitor | Hi,
My 21" Sony "CPD-G520" CRT monitor is sick nowadays. Need doctor's advise and pr |
|
|
| Re: Centrex | [quote:6944c26a01="gorders1"]Hi Centrex Australia went bust last year and no longer exists suprise s |
| [quote:e2f074291a="minnie"]Caps block dc and pass ac if you read dc across the cap it's shorted... A |
| Sony Vaio VGN-FZ11Z | Hello,
First of everything I am Italian so my English will not be very good.
I have some probl |
| TRY THIS, ENTER THE SET UP MENU AND GO TO THE ORBIT FUNCTION, SET ORBIT TO MAX AND TIME TO MIN. IF T |
| USE LEDS with 30v you can serialize up to 10,12 LEDS and that will give you more light then 3 12 vol |
| I swear I don't know where my brain was.. I meant to pick up two 22uf/50v elec. caps. at Radio shack |
| still no luck | I finally got around to soldering a new zener diode in, but the tv is still dead. I'm thinking the |
| [quote:a92737dde1="vtech"]
If the motor, you just MAY be able to dislodge it by loading a disc &a |
| I removed the traverse assembly which has the spindle and tray motors as well as the optical assembl |
| :lol:
Hi!!!
For mi ok 50 files max.
Tanks for all,plamensl good site !! |
| SET BASS TO MAX TREBLE TO MIN PRESS DOWN ON LOCAL KEYBOARD AND AT THE SAME TIME PRESS TIME TEXT BUTT |
| Re: I need this manual too | [quote:c7301be744="JaroMi"]Hello
I've got this DVD player and much problems with it. Can I ask You |
| Aiwa cxnma845u volumn cant turn down | cannot turn volumn down, kept going up to max when try to turn down, replaced vol control ,same. nee |