| Subject | Text |
| Which model is it? | [email protected] |
| Welcome to the Board, Hugh. It is correct that the HOT doesn't appear to blow when the set is powere |
|
|
| Plasma TV Hantarex PDP42QV | We need schematic of power pcb.Thanks! |
| repair : Wharfdale DVD Model WH-1000HD ResVal R814 | Anybody got Service Repair Manual
for Wharfdale DVD Player Model WH-1000HD
to check-up what the Re |
| dell d1025tm (sony) shuts down instantly | I got a dell d1025tm (sony) that shuts down instantly.
Keep pressing power button I could measure 1 |
| Re: Sony KV35v36 Picture Out Audio On | [quote:e771e5df4f="Vortex"]Hello, my Sony picture goes out every 15 to 30 minutes, but the sound sta |
| Monitor philips 107s pincushion distortion | Hi :wink:
First of all, sorry for my english, i'm a french guy :lol:
My CRT monitor Philips |
| May be it is soldering problem, try to re-solder the PCB, or change the IC XX4066 and replace it. : |
| NEED OF LABLES AND COLOUR CODES | [quote:1c55de7d09="Justmanuals"][quote:1c55de7d09="sflsan"]First off, how am I going to die?
And |
| [img:8c28232f67]http://i67.photobucket.com/albums/h287/rramani/pwrsupply.jpg[/img:8c28232f67]
You |
| SAMSUNG ps-42D4SK | I have been given one of these sets with sound no picture. Can anybody help with a schematic of the |
| Majority of the codes have no real meaning on philips units. Basically it is some sort of communicat |
| Aiwa service and user manuals wanted mx-zd95 or cu-dz95m | Hi any kind person out there got the manuals for my hifi mx-zd95 or cu-dz95m please? I've seen its |
| goodmans w322ns | your television is fitted with the formenti f19 chassis very common used in proline/goodmans televis |
| Hi there,
Your TV's SMPS is doing a power cycling ie. It trys to power up & switch itself off |
| Have been out of consumer electronics for some time...I used to see this problem on a regular bases |
| Lol, I remember doing this as well. I'd crank the volume up, lick my finger and touch the pcb around |
|
|
| Nordmende Spectra_V_1404_SV | The VCR does not switch on.
The VCR does a 'tick tick' every second from the power supply. The swit |
| kolintv flyback | tnx man for tips.i,ve check the capacitors and solder joints/paths around hor section everything is |
| [quote:de46426e87="fpc3"]jts,
Thanks to vtech's schematic, I was able to read voltages as follows |
| Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
| nikon d50 | good morning
I have my nikon d 50 that will not turn on I disassembled and I realized
that does |
| :D [b:3aa7d40ba5][i:3aa7d40ba5]send me an em,[email protected]
also give me full model nr and t |
| [quote:475a553cc3="fpc3"]vtech,
I just realized that you said the PD [u:475a553cc3]controls[/u:47 |
| Blown Zener like your case is the final effect not the cause.
Zener going to short circuit in tha |
| I'm very familiar with that dreaded error code.(see them come in for repair all the time) :wink:
|
| 1) Resolder all the output transistors solder joints and any other intermediate transistor stages th |
| FYI, the ABxxx error codes on first generation Philips dvdr's have no real meaning & it's genera |
| You pulled out from car ?
Is the load not lower than 2ohms ?
what kind of PS are you using to test |
| Re: need datasheet | [quote:059cefc208="thefixer"][quote:059cefc208="vtech"][quote:059cefc208="thefixer"]hello every one |