| Subject | Text |
| Schottky Rectifier Sub | I took out a shorted SB1060FCT - 10A, 60V Common-K Schottky Rectifier - from a LCD monitor. It is ex |
| Sub for TEA1533AP | Here's something I came across yesterday. I was working on a Sharp 32f641 that had a bad SCR driver |
|
|
| Service Manual for Polk Audio Sub woofer PSW-140 | Hi, i have a Polk audio PSW-140 sub woofer and need this technical manual because need one part of i |
| acoustimass sub schematics | I have just opened my AM 10. can fax you the schematics. I try to add an amplifier. There are 3 spea |
| Rattle in sub and maybe a bird | Just wanted to share this with any IL60 owners. I had a intermittent rattle in my right tower sub. |
| Zenith SL3528BG Horiz output sub | Hello Group,
Does anybody have a good substitute for the horizontal output transistor for a Zenith |
| Sub Amp | Try testing the transistors first. Look for a shorted one or one that reads different than others (s |
| IS 2SD2580 an OK sub for Sony HOT 2SC5426 | Just wondering if it would be OK to substitute a 2SD2580 for the shorted HOT 2SC5426 in a KV27S42 (B |
| Altec Lansing Sub of computer speakers | My wife accidentally shorted the input line which has caused a 60 cycle hum that increases when the |
| LG CT-29H32E reverts to s/by | @Admin, please delete similar post of mine logged in as "lon - guest"
I need help on th |
| [quote:e59dd6ff66="javelinpr"]i have the full schematics with the whole block diagrams, printed circ |
| [quote:93c621a9cb="minnie"]You got it! Sony O.E. or it doesn't work! Unless you sub an RCA HOT to So |
| Thanks for this tip!!!
My PSW2500 Subwoofer did the same problem too, the relay pulsated at high |
| Auto power setting for sub-woofer | How does setting the power switch to AUTO on my Boston Acoustics sub-woofer work? It is powered on a |
| Common failure parts are IC1421=LA7832=JVC # LA7832= sub with LA7833, R1541=1.8 ohm,2W (metal fuseab |
| My friends CSW250 sub has also burnt out at R24. Please email [email protected] if you find the res |
| Sony KV-32S26 | Will NTE sub parts be ok or should I get original??
I did find a site in Canada called Pacific Semi |
|
|
| awesome reply! i'll check out all of these things.
apon closer inspection i found a white box(i do |
| I'm using sub, Molex 21020-0251 digikey.com |
| [quote:3747f25abb="matthewy"]Thanks....Vtech, when you say feed external power to it, do you mean pl |
| Not sure how much you know about the system?
You see, the "SAW541/542" was not just the |
| Great got it thanks, gone ahead and bought another sub board (AA95-00705A) for a direct swap and als |
| Toshiba 3787DB - Very low Base / Woofer output | Getting a very low output on the sub woofer, with the sub and the base turned all the way up you can |
| [quote:e49eaef5fd="vtech"]Should not be difficult to determine as to why your sub/w is not working. |
| I need a complete model #. You need the sub deflection board. Look on tritronicsinc. If you replace |
| Hi, i own the same model.
I have a psu problem that im solving right now.
I found that one of the |
| Btw, there are suitable substitutes available such as :
CNY17-2
4N35
ECG3041
H11A1
ECG3096 |
| Description:
POWER SUPPLY (NLA - SEE NOTE)
SPECIAL NOTE:
ORDER SUB PART BASED ON S/N |
| Thank god for this post, the reds and greens were too strong on my 2060u and this helped me fix it c |
| I have a kef 2000 sub, all op transistors went short along with the -15 regulator.
The relay had go |