| Subject | Text |
| What happens when you tap the monitor on the top with your fingers? It may be just a simple solderin |
| Re: I repaired my N3250w thanks to JRnTX | [quote:90c6317b95="twerq"]Read through a lot of posts. Seems power problems with the N3250w is eith |
|
|
| You've also got the problem of how to control the frequency if you are not exciting the motor(now ge |
| soldering always getting a dull finish, dry ? | hi,
i bought a soldering atation and doing a bit of soldering work on a curcuit board,\
howeve |
| :D you need to remove the shield on the bottom of the tuner section. if you still have the broken rf |
| magnavox MS3252S431 tv shutting down...among other things | hello,
my MS3252S431 (L01-1UAC-7638 chasis) 32" tv has broken down for the 3rd time in 18 mon |
| If you really have low brightness on the monitor, i.e. the black background when running text mode ( |
| Thanks,
I will get a hotter iron then, and try again. |
| surface mount soldering techniques | Has anybody got some surface mount soldering techniques
The first way I was taught to replace sur |
| yes its bad on both. I've spoken to a friend who has the rquired screwdriver to open the unit and a |
| [quote:5438d89434="Anonymous"]Line OutPut Transformer earth would be under the Line OutPut Transform |
| LG 44SZ21RD IS AN LCD REAR PROJECTION TV, TRY RESOLDERINGTHE FLASH ROM IC2 ON THE VERTICALLY MOUNTED |
| Toshiba 32A10 | Update:
Found a block diagram of the Toshiba TMPA8700CPN micro proc (QA01 in
the schematic). It |
| more info on replacing the parts directly | I have some help to give if you have the exact same problem.
When you power up the screen, brief |
| Re: Dell Inspiron 1150 Motherboard Circuit Layout | [quote:083b251c22="Anonymous"]I have just replaced the power jack connection on my laptop due to fal |
| Err in display. | [quote="Anonymous"]PGelsman
Remove the deck, clean the rotary mode swith contacts, carefu |
| It's a very good news to me that 14.6V is acceptable as 15V line and that the chase for relay issue |
|
|
| There is no problem using radial mount. As far as the short legs, you need to have a small tip sold |
| orion | Oh ya sorry, I have an Orion model# STV2750 and all I have is a multi meter and soldering iron.
Tha |
| Pioneer VSX-5900S | I have a pioneer vsx 5900s and the voltage select rotary switch on the back panel of the receiver is |
| PACE PPS101BE solder station Soldering hadset | I have a PACE PPS 101BE solder station which I need a new soldering iron handset. I have contacted |
| Re: UDM3 FIXED!!!! Located PR003 and replaced | [quote="fatz2000"]:D :D :D :D :D :D [size=26:5bce5812d0]FIXED![/size:5bce5812d0]
|
| You'd need a soldering iron and a little experience with soldering, I'm sure... as well as not being |
| Canon 550DII | Hey boys, have you any tech info about this machine, is a microfilmer that is giving me a headhech, |
| the repair is not a simple one. lasting repair involves replacing a capacitor, 2 surface mount resis |
| Hello eli2
the almost thing with Rainbow Effect at the classic Sony Black-Matrix Tube is, that so |
| Re: Philips TV problems | I have a 21" PHILIPS colour TV purhased just 1&1/2 year ago. Just 2days ago, due to mishand |
| Oh..... yeah the problem... right.. lol
The screeching sound may or may not be related to the no |
| Thanks Gary for your reply, would you know which component it is..I am ok replacing items with a sol |
| Panasonic TX25AD2 Screen flashes continuously from boot | Hi I have a Panasonic TX25AD2 television. (UK PAL CRT). Upon switching on set the display flashes. A |