| Subject | Text |
| power cord 12 vdc | I have a magnavox 12 volt dc or 125 volt ac color tv. It works fine on 125 volts ac but I have no c |
| The 'K' as part of the resistor specification represents tolerance. I think from memory it is +-10% |
|
|
| Re: denon udm3 | [quote:9288a09cb3="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
| Ok. I forgot to add something. I've measured the KR KB and KG on the pcb on the CRT. If the board is |
| intermittent tsjirping sound Neufunk TV | Yes, i just replaced thr transistor to fix. As to how to locate it, i had the benefit of a similiar |
| Is it possible to attach a photo of the circuit board here? Unplug it and measure everything with y |
| No, I don't have it. But thanks for the idea. I once had a PC motherboard which has strange behaviou |
| Mitsubishi VS-45609 | I have a Mitsubishi VS-45609, manufactured April 2001.
Yellow and Blue shadows appear in the pict |
| SHARPY T.V trobelshoouting | HI friends
I have a problem with my 14'' sharpy colour tv from made in shina.
it was stop |
| Switch Ohmeter 10x you check D with S pin and change the pin again ,result the meter swing to high s |
| Capacitance meter. I have a fluke 175. You can find a capacitance meter on ebay for cheep. |
| how tocheck this transister sta 353 yy3 | how tocheck this transister
sta
353
yy3
what type of this transister
how to check its |
| CTS Encoder 288S0161 | Thanks for the great info. I feel one step closer to finsing this part.
Also underneath the part |
| Mike,
I am not familiar with the specific model but more likely you have a power supply issue. Disc |
| 400 volt capacitor how to know its leckage or damaged | The best way is to use a ESR meter but a standard capacitance meter would work also but not 100%.
A |
| 400 volt capacitor how to know its leckage or damaged | 400 volt capacitor how to know its leckage or damaged
one day my own digital satellite reciv |
| lopt sony kv2052et | anyone havin the lopt number of the set.1978 model.sony kv2052et. |
|
|
| Re: Tape dack made by technics RS-TR373 does not play sound | <span class="notranslate" onmouseover="_tipon(this)" onmouseout="_tipoff |
| Re: philips 25gr | [quote:f15e5ef5bb="polaret"]Hello
I have a philips 25gr TV and the problem that i have is that aft |
| For Sale: Keithley 178 5 1/2 Digit Bench Digital Multimeter | For Sale: Keithley 178 5 1/2 Digit Digital Multimeter. It is a lab quality digital multimeter with a |
| Mystery Diodes | Well I'm new here and athough I know alot about tube equiptment I have limited knowledge of solid st |
| Panasonic CT32SS31 power | I have for repair a CT32SX31 set. I have no HV but power. When I plug it in I hear a high pitch and |
| If you get a diagram you can see what you are soldering:)
If not, replace the electrolytics around |
| Gents, l was working on the very same unit, with same problem.
Battling for 2 days and no luck.
|
| Can you measure resistance (Ohm) with your meter?
If so, a short should measure 0 - 10 Ohms
A go |
| Re: Goodmans GTV42P3 42" Plasma TV - Power Board Repair | [quote:ba34fe886c="Mad Professor"]Good Day All.
I have a 3 year old Goodmans GTV42P3 42" P |
| You can buy a ESR meter from MCM electronics for about $20.00 |
| Re: looking for | [quote:6e09f5f793="jts1957"]That's the "Location" and "Rating/Value" of [b:6e09f |
| Being a switchmode powersupply I would not run it without a load otherwise it may self destruct. Plu |
| Yikes! Now it's getting complicated! I found the Power Transistors and ordered them through
htt |