| Subject | Text |
| measuring high value resistor? | i have a 1.8 Mega Ohm resitor, my meter can read up to 2 mega ohm, but when i try and read the value |
| Shorted transistor | This is almost textbook shorted transistor. I have had a denon that whe nI removed the output transi |
|
|
| The EI-35 number is listed in the parts which came up on a search to Sumida Of course Tenpao is what |
| Posting to help anyone else trying to fix their IL60 plate amp. While I will admit this basically ju |
| troubleshoot DVD laser unit | I recently installed a replacement DVD laser unit for my Pioneer XVHTV520 entertainment system. Upon |
| RCA RTD 155 wont power up | My RCA home theater reciever wont power up. I need a service manual or schematic to find where it is |
| usually a system like that would "protect" itself from speaker wire shortages, or being tu |
| And it just may help if you mentioned the make and model of the phone as well. |
| [quote:837741ee0a="vtech"]..just remember to remove the "shorting solder bridge" before re |
| nissan qashqai radio code | Hello
Can someone decode radio code from my qashqai?
There are all information form the body of r |
| I carefully looked at the picture you posted... | I must be blind... I see the CRT board. I don't see any white cabling that is loose. I may can be of |
| Hi,
The situation is very much the same here (in Bulgaria) - same new stores, which give credit, |
| 36" RCA -- won't power up | Since I'm posting this while away from home I don't have the model number but TV is about 5yrs old. |
| Jason,
When you say you disconnected the U board, did you get any raster?
I wonder why you wou |
| Minnie,
I unplugged the Y sustain board and the same thing occured.
Note: there is a ribbon cable |
| dont forget to change low ohm resistor off flybackthat feeds the voltage usually 26volts to the vert |
| Hi Ed,
I had a similar situation with a '70's Pioneer amp using similar NEC transistors. Over her |
|
|
| the primary 240vac side is only a lead and a plug ( which tests ok ),, connected via the thermal fus |
| [url]http://imgur.com/a/d4OeQ[/url]
'TH FUSE' internal to the transformer's primary may have open |
| Thanks for the feedback. the chemical fuses that you refer to what do they look like? Resistors with |
| Re: LaCie CRT: adjusting Green gun? | [quote:7cbe756ed2="Guest _UK"]Hello...
The display of my LaCie ElectronBlue 19" (Manufacture |
| magnavox PTV Blue screen | I have a magnavox PTV and spilled cooling fluid on the video input part of the pcb. I cleaned the b |
| For model SLPG370A the optical system is CDM12.1/0 , and fot SLPG400A - CDM4/19. It is more likely t |
| ALL "new" assemblies I've ever received from my suppliers have arrived with a shorting 'cl |
| BN44-00662A SCHEME | PLS. SEND ME SAMSUNG 40F6400 TV PSU SCHEME
CADR MODEL BN44-00662
THANKS YOU IN ADVANCE. MO |
| 3rd gen ipod issue: batter won't charge | when i was changing the battery on my 3rd gen ipod i forgot to replace the protective cover that kee |
| need schematics for CTX VL 700 | Can anyone email to me the schematic for a CTX color monitor model VL700? FCC ID DBL1769E. By CTX In |
| sony kp-53s25 | I have a sony kp-53s25. It only stays in standby. When I first plug it in a relay in the power sup |
| [quote:b18826c1bb="plamensl"]Hi,
The situation is very much the same here (in Bulgaria) - same ne |
| thanks for the response. the fuse is right next to where the power cord goes into the power board (? |