Subject | Text |
tweeter | 1. google for specification of tweeter:
at least
- Ohm (example: 4)
- Range (example 5000-2000Hz) |
Daewoo DV-K813 VCR video loses time at power cuts (battery) | Hi, I am writing this to help anyone who might have had the same problem as me. I bought a great Dae |
|
APC-700 | I am in the same boat... that is looking for a schematic. My APC-700 is reading incoming voltage as |
Re: Need Power Supply for Yamaha DVD-S550 player | [quote:184d4d980f="sduncan"]Hoping someone can help. I have a nearly new DVD player and I am reloca |
Pioneer Stereo Amp SA-510 Dead right channel...help!!! | Hello...I just acquired a used Pioneer Stereo Amp SA-510. It's a great little amp, except the right |
RESISTOR PROBLEM | HELLO, The first thing I would ask is what the amps total of the circuit would be that this fuse is |
| I really don't know to much about recievers but I've allways fixed my own thanks to theese boards. I |
| Check .47 ohm resistor RF801S. 1 watt. See if it's changed in value. If all the yolk return resistor |
STA353 | ok here or read the pdf icmaster.com
have fun
STA353
PNP Silicon Transistor
Descript |
| 04/13/2011 10:05 PM 612,477 6507_00b.pdf
04/13/2011 10:05 PM 1,215,173 80A_.pdf |
Fusible resistors better than Fuse in TV Power Supplies??? | I saw the fusible resistors ( typically 1/2 watt. .1 ohm rating. Sony #1-202-933-61 ) used in a lot |
Linear Series LS2150 Car Amp | I need a schematic for a Liner Series LS2150 300 Watt Bridgeable 2-Channel Mosfet Power Amplifier
|
Reciever | [quote:2acba07ec9="jts1957"]Does the receiver work on any other Function? Radio / CD, etc.?[/quote:2 |
| 04/13/2011 10:05 PM 612,477 6507_00b.pdf
04/13/2011 10:05 PM 1,215,173 80A_.pdf |
| The best way is to check if any line current is flowing. In a typical two-wire telephone system, a c |
| Grundig Tv Model T-51-540 , when i switched it on it's having chik,chik, chik.... sound & the po |
| I pulled the convergence board, and upon further investigation, I found two bad resistors located in |
|
| 110's are 11 watt, 150's are 15 watts, 180's are 18 watt. 180's should be fine unless the Chinese kn |
| According to RX-317TN service manual:
R817 QRG022J-121GJ7 120 OHM 2 WATT Oxide Metal |
| I am not 100% sure where to check for the voltages you just described, I usually use a schematic bec |
backlighting led monitor | Replacing r 1 resistor on 701-cpt with 10k .25 watt resistor as listed on schematic supplied by pdf |
PC power supply suggestion ? | Hello all,
I have problem with my PC power supply it mentioned 450W when i,m connecting addetional |
specifications for a diode :PH4148 | Hi all.
Can any one please help me in knowing the specifications of a diode with this number on i |
Samsung SV-5000w | It is 1 year old VCR. It is plugged in to 120 AC outlet. The outlet is working.
The following hav |
| Usually, it is fairly easy to trace the wiring inside the camera to at least find out which pins go |
Radio code blaupunkt dublin c31 | Hi,
could you help help me radio code?
numbers from original package:
BP1120 1 2345199
7 6 |
| [url]http://www.hifiengine.com/manual_library/arcam/sa200.shtml[/url]
1800 ohm 1 watt |
| Convergence IC time. Replace Q751 and Q752 STK392-110's, check r7716 and r7731 both 1.2 ohm 2 watt. |
| Bingo
All you need is a 10K 1/2 watt standard resistor. :) |
| Thanks for the reply vtech, yes the mains is switchable 110 120 220 240 with a card, but somewhere i |