| Subject | Text |
| Please Help with APEX GB5108 | I have a projection APEX GB5108.The top half of screen is working perfectly, the lower half does not |
| Re: LG Flatron w2043t-pf Service Manual | [quote:b66fe7b0da="flickguy"]Hi to the administrator or folks reading this!
Please send me any se |
|
|
| Sony KVS2951 AE3 chassis – no color | TV has no color only B&W picture with horizontal colored stripes. Just like when 8.86MHz is not |
| Thanks for replying. The router still functions but only as a wireless local area network since it d |
| Looking from the top of the board, both R105, R106 are next to a CN2 connector. As it was said, use |
| faulty remote | Yes the buttons on the top of the tv still work and sometimes after the tv has been turned off the r |
| Problem with Philips C2082DAS | I got problem with my Philips C2082DAS monitor.
When I power it, LCD shows FW version and then it i |
| Beko Model 284248WNS Chassis 14.2 Colour problem | Ok, just to let you know that instead of manually degaussing I ran the TV through a process of turni |
| Re: Panasonic TV TX-25MD1 | [quote="Colin"]Panasonic TV. TX-25MD1
Hi there are two problems with this nine-year-old set.
A |
| Re: 52" Toshiba Projection TV Colored Lines | [quote:a09763528e="nicolejmilligan"]Hello. I am technically retarded, so bear with me. I just inhe |
| Please make sure the vertical signal is sending out from Matrox Millenium by oscilloscope or counter |
| capacitors | Dietrich, any of the caps that are in paralell with the horizontal output
transistor could be bad c |
| It sounds like a bad electrolytic capacitor in the vertical circuit. You would have to know about t |
| lcd gives only sound but no picture | My LCD gives only sound, but no picture.
Model grundig lcdw 76-8410 top.
If someone can help. |
| NEC Multisync FP950 or FP1350 schematic needed | After some sparks (I heard), the image has gone, now just the front led is on :(
Where can I find |
| Optimus STAV 3260 Receiver: Power relay clicks on & off | :?: When I plug the power cord into the supply socket, the relay nearest the internal fuses clic |
| dp42sp | hi, im new here. I have a 42' plasma dawoo that broke yesterday. the bottom half of the screen wen |
|
|
| IF THE LINES ARE VERTICAL IE TOP TO BOTTOM THEN VERT STAGE IS OK AND FAULT IS IN LINE, UNUSUAL TO GE |
| Is this normal appearance for and amplifier IC?? | I'm in uncharted territory (for me, anyway). I'm a radio tech--and don't find much in a CB I can't |
| TV is working again, for now I only would like to now the settings of TDA9351N3. As I have now possi |
| here is the color codes:
PIN LABEL FUNCTION COLOR
1 RED Red color signal pink
2 GREEN Green co |
| Sony WEGA KV-34HS510 Discoloration | I have some discoloration in this set at the Upper Top Right and Lower Bottom Left of the Screen.
|
| Philips TV 29SX8671/29SX8771 G8A Chassis | Greetings all,
I have a problem with Philips TV. No controls work, no sound, but |
| Re: On Bulbs | [quote:9dde599bbc="Bangonkali"][quote:9dde599bbc]An IC on the Power Supply / Inverter printed circui |
| you have at risk a schematics diagram of your unit problem? may be the problem is still in the power |
| sounds like a HV problem.
thats an AP chassis isnt it? that top board being the 'N' board?
this |
| primar: Pin:
2 x 21V, AC 22-21-20
2 x 20V, AC 17-15-13
2 x 11V, AC 16-15-14
1 x 6V, AC 24-23 |
| Re: 50" zenith tv convergance issue | [quote:5df3b9f13b="riverdale"]I have a 50" zenith television that i just replaced the hv splitter an |
| jd75125 addendum PVY4665RK | :) Sorry Larry E, I did not provide much info. after taking more detailed
look at TV, here are wha |
| Re: I Need code unlock PHILIPS 22 DC501/62 | [quote:eac9598e85="Aragonito01"]Hello
First of all, sorry for my very bad english.
I have a P |