Subject | Text |
technics technicians | I have an old technics turntable which needs a new motor..can anyone please tell me where i can take |
RENAULT LAGUNA(94) | [b:181fa4cca1][color=blue:181fa4cca1][/color:181fa4cca1][size=18:181fa4cca1][/size:181fa4cca1]
HI I |
|
Home Cinema Jvc TH-A30R DVD NO READ DISC AND NO EJECT | I have a dvd jvc th-a30r and dont open the door, i put one disc manually into the cd case and the mo |
| [quote:5a5876d182="Anonymous"]I traced back to the input of the motor control IC (SIP #BA6209N) pins |
Re: potentiometer / rheostat questions | [quote:78dcb08f64="jerry b"]Hello,
I have some 12 volt DC "rope lights" I am putting in |
| Thanks for the response Ray! This would actually be my first real t-shoot and I only followed the ad |
Re: dvd Philips LX3600-disc dosn't turning | [quote:220bcf903f="Gen"]Hello everybody,
problem:
the motor disc is not turning on, after inser |
Panasonic VCR Message F04 | First of all with the cover removed the start/end sensors may be picking up artificial light upsetti |
| hi
the problem that u refer is on the main motor gear.
remove that gear and turn it back.u have t |
Re: denon udm3 | [quote:01c6aab246="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
lg dvd player | I have an lg dvd player, but it only regnizes VCD but not DVD, the sensor ans the motor have voltage |
fixing the okidata printer | I have an okidata 320/321 turbo printer, the alarm that paper is out keeps popping up but a full rol |
| there are different types of skipping. does it stay in one place and stutter, does it jump back, or |
| What kind of gate is it?
What motor drives the mechanism?
What are the connections like?
Are ther |
| YOUR FAULT IS PROBABLY THE OPTICAL BLOCK ITSELF, IT COMES COMPLETE WITH THE SPINDLE MOTOR AND SLED M |
| It could be the pump or a fault on the control board, trying a replacement is one option to take.
|
Service maual or schematic diagram for THORENS TD-105 | The motor rotates faster without being activated and adjusts the speed '.
Thanks in advance. |
|
Panasonic vcr | suspect small plastic pulley on loading motor shaft, underneath mechanism
dont know panasonic part |
| Having worked on many pioneers, am very familiar with your unit; Reason is rejecting, coz it's not a |
CD READING PROBLEM | PART 2
IT IS NOW PLAYIN SELECTIVELY AT RANDOM .AND THEN NOTHING AT ALL.COULD YOU BREAK IT DOWN AN |
DC Motor C4557-60003 from HP deskjet printer | I tested this motor,
it starts turning at 1V, very slowly. I was quite surprised by this.
At 6V it |
Re: Blown Fuse - Troubleshoot Why | [quote:dffa48c5b5="huntro1"]vtech,
Thanks for your reply! To answer your question, above G1 and G2 |
| Back up to the driver IC and all the way to the microprocessor. You should be able to see some activ |
Hello, will somebody help me fix a Sony TC-250A Reel deck?! | Hello world, I am an amateur DIY-er, and I am trying to fix a Sony TC-250A Reel-to-Reel deck! (A poo |
Panasonic VCR Message F04 | Hi!
The link is below.
http://www.eserviceinfo.com/downloadsm/9064/Panasonic_K-Mech.html
I checke |
HP laserjet 4L - makes groaning noise | Main motor RG5-0765-000 (Worn gear is part of assy) |
Re: denon udm3 | [quote:9288a09cb3="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
| HO2 USUALLY MEANS THE SPINDLE MOTOR IS NOT ROTATING, TAKE THE LID OFF AND WHILE THE DISPLAY SAYS REA |
| bad capstan motor. Less than $100 part. |
| What I was referring to was the actual mechanism involved;
ie, When you replace a pickup on lets sa |