| Subject | Text |
| Re: denon udm3 | [quote:01c6aab246="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
| lg dvd player | I have an lg dvd player, but it only regnizes VCD but not DVD, the sensor ans the motor have voltage |
|
|
| there are different types of skipping. does it stay in one place and stutter, does it jump back, or |
| What kind of gate is it?
What motor drives the mechanism?
What are the connections like?
Are ther |
| YOUR FAULT IS PROBABLY THE OPTICAL BLOCK ITSELF, IT COMES COMPLETE WITH THE SPINDLE MOTOR AND SLED M |
| It could be the pump or a fault on the control board, trying a replacement is one option to take.
|
| Service maual or schematic diagram for THORENS TD-105 | The motor rotates faster without being activated and adjusts the speed '.
Thanks in advance. |
| Panasonic vcr | suspect small plastic pulley on loading motor shaft, underneath mechanism
dont know panasonic part |
| Having worked on many pioneers, am very familiar with your unit; Reason is rejecting, coz it's not a |
| CD READING PROBLEM | PART 2
IT IS NOW PLAYIN SELECTIVELY AT RANDOM .AND THEN NOTHING AT ALL.COULD YOU BREAK IT DOWN AN |
| DC Motor C4557-60003 from HP deskjet printer | I tested this motor,
it starts turning at 1V, very slowly. I was quite surprised by this.
At 6V it |
| Re: Blown Fuse - Troubleshoot Why | [quote:dffa48c5b5="huntro1"]vtech,
Thanks for your reply! To answer your question, above G1 and G2 |
| Back up to the driver IC and all the way to the microprocessor. You should be able to see some activ |
| Hello, will somebody help me fix a Sony TC-250A Reel deck?! | Hello world, I am an amateur DIY-er, and I am trying to fix a Sony TC-250A Reel-to-Reel deck! (A poo |
| Panasonic VCR Message F04 | Hi!
The link is below.
//www.eserviceinfo.com/downloadsm/9064/Panasonic_K-Mech.html
I checke |
| HP laserjet 4L - makes groaning noise | Main motor RG5-0765-000 (Worn gear is part of assy) |
| Re: denon udm3 | [quote:9288a09cb3="guest"]Yep - I have exactly the same problem. CD tray won't eject. No motors
ru |
|
|
| HO2 USUALLY MEANS THE SPINDLE MOTOR IS NOT ROTATING, TAKE THE LID OFF AND WHILE THE DISPLAY SAYS REA |
| bad capstan motor. Less than $100 part. |
| What I was referring to was the actual mechanism involved;
ie, When you replace a pickup on lets sa |
| Error code | C 0910 =2nd Drawer Paper Lift-up Failure
C 0d50=Duplex Unit Drive motor M31`s Fail to Turn
C 0F20= |
| machine | if you up to it try this first make sure thier no problem in the mechanisim,belt or motor [like the |
| dvd Philips LX3600-disc dosn't turning | Hello everybody,
problem:
the motor disc is not turning on, after inserting in tray. "NO DISC" |
| Sony dvp-cx850D HELP | I have a Sony dvp-cx850d a 200 disk dvd player. it wasn't reading the dvd most of the time so i open |
| Have to commend you on t'shooting ability & persistance. Based on your findings it sure points |
| Kenwood KDC-75R Repair and Code disable | A friend on a pension has asked me to repair her car CD receiver and disable the code feature so she |
| Hi!
I have the same machine and a wary similar problem!
After a lot of struggling I been able to |
| Hi, mbelec, | Hi, mbelec,
thanks for your reply...
Where would I see this error code ?
On the PC screen I ass |
| Ok, so what I found:
Ribbon cables are good.
LA6510 is the driver for both the head motor and |
| Sony 250A Reel Deck Hum | Thank you for answering!! Pardon my ignorance, but since I'm new here, I'm not even sure how to repl |