| Subject | Text |
| I think your TXT and OSD are OK.
Check/replace these components in the ABL-line, 2x SMD-zenerdiod |
| [quote:44c2dd8306="minnie"]Take the back off and see if the capacitors on the ballast are puffed up. |
|
|
| Delete JR86 (0 ohm ).
Addition R803(220K ) , R804(220K) and S802(Slide switch)
More detail pls |
| Re: diagram | [quote:553c7dc938="picasso"]? email adress
A broken R793 is a [u:553c7dc938]result[/u:553c7dc938] |
| Goodmans GTV42P3 42" Plasma TV - Power Board Repair | Good Day All.
I have a 3 year old Goodmans GTV42P3 42" Plasma TV, that has stoped working. |
| OK.. ive got some things for you to try out.
I dont work on very many misubishi sets.... so my gues |
| Re: PCB2310 R133 resistor | [quote:c7f9e4e92a="Transanalog"]I don't think R133 is 800 ohm, rather 0.1 ohm. R133 on mine is Brow |
| gumbie
By connecting the extra speakers the output impedance may have been halved and very likely |
| alright guys. here is the latest. I undid the flyback from the splitter, and stuck it in a coke bo |
| Can you measure resistance (Ohm) with your meter?
If so, a short should measure 0 - 10 Ohms
A go |
| Thanks again for your help and info | Sparky thank you very much for your time and help, just a few more questions if you don't mind: I a |
| ohm out the main power transformer should read 1ohm or around that if you have a open then thats you |
| check mosfets | check the pair of power mosfets near the fuse. 8 pin chips, 4 legs on one side tied together on the |
| Re: panasonic tv - URGENT HELP PLEASE | [quote:35c3b5b82c="pun"]my panasonic tv ct-32sx12 won't turn on, it was working fine yesterday.....p |
| check R704 value can vary depending on model usuall 100 ohm |
| Check for open .1 ohm resistor and bad MX0841.
Check HOUT transistor for shorts and HDRIVER transFo |
| Samsung SyncMaster 710MP - TV mode not working | Hello everyone! This is my first post so forgive me if I miss something to explain.
This TV sudde |
|
|
| [url]http://www.hifiengine.com/manual_library/arcam/sa200.shtml[/url]
1800 ohm 1 watt |
| convergence | well R3243 the 110K Ohm or 120K Ohm resistor (both values have
been used by Zenith) should be repla |
| Another common cause for vertical overscan (which in turn can cause clipping in the output stage and |
| :oops: Sorry I meant STK392-110's. Any time I found the 1 ohm resistors open it has been those IC's. |
| DVD Player: "No disc" message when disc is on tray | Hi, I hope someone can help me with this.
I got a Coby DVD-223 some days ago, which wouldn't read D |
| Re: potentiometer / rheostat questions | [quote:78dcb08f64="jerry b"]Hello,
I have some 12 volt DC "rope lights" I am putting in |
| Hi Ed,
I had a similar situation with a '70's Pioneer amp using similar NEC transistors. Over her |
| I found the problem without schematic.Very hard to find - one resistor have been changed the value |
| We have repaired a couple of these the value of R1 is 10 ohm and we have just used a 0.25w metal fil |
| Newsflash: TV IS FIXED!!! yay!
There was a hairline crack on the HOT emitter pad from changing th |
| Check/replace these components in the ABL-line, 2x SMD-zenerdiodes 6,8V, 1x SMD-diode 1N4148 and 1x |
| Re: Same TV, Same Problem.... | Hi..just to shere my knowledge..i from malaysia but i think the basic still same..i have lot experie |
| Replace all three cap the one 300 ohm resistor and the vertical IC still has a horizontal claps.
N |