| Subject | Text |
| [quote:fcb0f223cd="fongs"]Then u could be having a bad transistor, dying up capacitor or bad groundi |
| Sadly, no. The fault was an open circuit resistor in the preamp stage, probably from overdriving it. |
|
|
| im having the same | im having the same trouble with an onkyo tx-sv535 no sound any ideas |
| Re: Resolution for the no net no sound 609 | [quote="Scrufy"]Press VCR/dvr and power/standby at same time.
You'll see it say clear for |
| [quote:1c2dcfd480="Anonymous"]Thanks for the reply! Yes, it does make a clicking sound when turning |
| Yamaha RX-V1065 DC PRT Fault | Stumped again . . .
Have a RX-V1065 with about -2.5V on emitters of output transistors, SBL chan |
| Bob,
Before condeming any device, best to attempt to narrow it further.
Based on the age & |
| LOOKING FOR MANUFACTURERS PART NUMBER | I'm looking for the manufacturers part number for an IC thats used in an Adcom tuner/preamp GTP-500/ |
| Re: Service Manuals | [color=red:756723afa0]Schematics[/color:756723afa0] for these are as follows:
- NAKAMICHIA PA-7 A |
| After a long break - has anybody pract. tips for disassembly | Hi again,
now I have: my Preamp sitting in front of me, the replacement GoldCap and no idea of ho |
| service manual sales | www.servicemanuals.net sells service manuals for Sony , Aiwa, Akai, Bang & Olufsen, Daewoo, Doko |
| Harman Kardon AVR 325 No sound | I picked up an Harman Kardon AVR 325 Receiver.
Everything is working except for sound,
However the |
| Diode Replacement? | I saw a few posts ago (early 2009) a member posted something about replacing the diodes in the recei |
| help fix bosses stereo | my first post, thanks for reading. i am repairing my bosses (i know!)vintage receiver, pioneer sx950 |
| H/K AVR 25II - protect mode only with center channel | Hi,
First thanks for the tech manual/schematics! Wonderful start. I can sort of read schematics a |
| Philips 32PW6305/21 in standby -no CRT "gong"/RC/b | Philips 32PW6305/21 3years
Hi,
when switching to EXT1, TV went to standby, red power button.
|
| Testing the circuit is to be done with the power off!!
Do not apply power until you are sure you ha |
|
|
| changing microfarad values in replacing capacitors in an amp | I want to replace the electrolytic capacitors on a circuit board for the power amplifier section of |
| a) Get an external audio amplifier with its own speaker. Plug its input into the right front "p |
| I believe your TV audio output come as a dc volt that can blew your aux circuit, if you have oscillo |
| Then u could be having a bad transistor, dying up capacitor or bad grounding somewhere. Unlikely to |
| Re: Kenwood Receiver problem | [quote:7db6a202cf="Guest760"]I have a Kenwood KR-A5040 AM/FM Stereo Receiver. It's an older model b |