| Subject | Text |
| Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
| re; Mitsubishi | Hi, try inputting a dvd signal into "video input 1" then if you get a picture
it probably is a tun |
|
|
| Need the Pixma iP1500 ac adapter circuit diagram | Hi, all!
I need a circuit diagram for ac adapter Canon K30231 (from Canon Pixma 1000/1500 printer |
| [quote:6e7cb89d10="gary"]replace c1260 in psu section, 1000mfd 10v[/quote:6e7cb89d10]
could u be |
| I am having kind of same issue, have same brand/model plasma tv, I noticed in the begining the strip |
| Reinstall U31.
Disconnect other amp connector J7/MCON12.
Repeat resistance measurements to SAM |
| VCR panasonic is dead, power supply.......... | Panasonics VCR is dead & the problem is on power supply, i have changed the faulty STR, but ther |
| Re: Surge protector necessary???? | I don't use one. I think it depends on what the other poster mentioned.
If you have an industrial |
| Schematic | I need Schematic HP laserJet 1000 |
| This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after pay |
| acer 19 inch no backlight | acer 19 inch widescreen ... power light comes on no video..... blown caps in inverter circuit... rep |
| there is a 1000 pf 2kv capacitor in the line output stage often breaks down and causes these types o |
| Studioworks 775n (CB775BN) brightness adjustment??? | Hi all,
My monitor brightness controll is 100% on the OSD & my monitor is still darker than it |
| light bulb broke off the wires for main display | I have a 1995 RX-V850 Yamaha Stereo Rec. the through the hole light bulb that lights up the main dis |
| Aiwa Tv, Model No TV-C201KER is not turning on, Help Plz. | Hi, I have Aiwa Tv of Model No TV-C201KER, but now it is not working, I have checked the power cord, |
| Yikes! Now it's getting complicated! I found the Power Transistors and ordered them through
htt |
| Re: R/p LCD tv backlight/s | [quote:e6750a4f4b="Old Bassid"]Yes- it is done all the time in pro shops(lights only last @1000 hrs! |
|
|
| Liebert - GXT-3000RT-120 (60-Hz) Schematic? | This model is discontinued,
so I am (Finally) hoping to find some released service info.
I have |
| Combining mixer outputs | I have been running a mixer for live bands & karaoke for years combining the left & right ou |
| Questions on Zenith SJ2773LK | Thanks for the information. BTW, where would the horizontal output transistor & and the power su |
| I did't find a scheme of amp., but I checked parameters of the transistors. You can use IRFZ44 witho |