| Subject | Text |
| Usually, there are no equivalents for STR... hybrid circuits. Those are used in power supplies, both |
| aoc 5en problem | greetings!!!
i am repairing a 15" AOC monitor, model: 5en, black chassis. Its first
|
|
|
| I think you should use a PLL solution. Build a VCO (voltage controlled oscillator) which can deliver |
| Philips 29PT2162/69R Vertical Shift | Hi, the above unit has a corona discharge but was later rectified. After rectification, the picture |
| MRF455 2 stage amp LOW Power | Can any one help me trouble shoot a Generic Amp"HY Watt 150"
Linear amp for amateur radio |
| Electrolux-Washing-Machines EWF 1234 doesn't start, Hints t | Hello! I am stuck, please help me finding a solution.
Our washing machine one day just didn't star |
| How do I limit voltage? | Hello,
First, I am new to this forum and am not savvy in electronics but I am an electrician.
|
| Radio Amateur short wave Power Amplifier Yaesu FL 2277 | Hi,
I am even not sure if I am posting this in the right forum. Anyway, help would be very much app |
| SCMI---Great Test & Measurement Software for free downlo | website: http://www.virtins.com
PC version: http://www.virtins.com/SCMISetup.exe
Pocket PC Versio |
| how to check rotation | Hi! Help me to understand how to check rotation on a hermetic three phase refrigeration compressor f |
| Hi,
1. Is input voltage for LD1086V correct? Linear regulators will get very hot if input / output |
| Sound Card Oscilloscope, Spectrum Analyzer, Signal Generator | PC version: http://www.virtins.com/SCMISetup.exe
Pocket PC version: http://www.virtins.com/PocketI |
| i`m currently making the same sort of project for my cars thermal fans , Two stage temp cut in cut o |
| technics sl-l20 turntable problem | Hello I hope someone can help me I have a problem with my technics sl-l20 linear tracking turntable. |
| Sony Trinitron KV34SL40K | If anyone could please help me with this TV problem
I would appreciate it very much.
Power supply( |
| Heh, sounds like you've got a bunk VGA cable that's causing echoing. If it supports it, use DVI (a l |
| I realize this discussion is a few months old at this point, but I wanted to chime in with informati |
|
|
| Do you think the top ones (the rotary knobs which you send MIDI CC messages with) are likely to be e |
| Philips 29pt5515/58 TV service menu problem | Hello. I have a problem with the horizontal phase of philips 29pt5515/58 tv. The picture is shifted |
| Yes I can get into service mode and change any setting available. But no matter what I try to change |
| All of this appeared to be good to me until I learnt about thermal instability in power MOSFETs the |
| NEED OF LABLES AND COLOUR CODES | [quote:1c55de7d09="Justmanuals"][quote:1c55de7d09="sflsan"]First off, how am I going to die?
And |
| Pioneer Elite 7.1 issues | My receiver turns on and off, but stays in Phase control the entire time its on. Its an 07 model, an |
| Yes, it is about the type i thought about. National has a lot of different regulators, i can recomme |
| Ok, out of the 17 pins on the cable, eleven pins are used for different voltage/signal levels. The |
| Hannspree LCD TV PSU JT01 | [quote:e73ed61d26="joefair2"]Do you know what the specs are on Q7 ???[/quote:e73ed61d26]
Q7 is MM |
| The balanced connections use a shielded twisted pair cable, the two twisted conductors carry the ori |
| The easy button is send the D board to Sony for phase 3 repair but Cory is also correct. Last board |
| Automatic control and display of Room temperature | hello every one and i hope they all ok could u help me
A temperature sensor is to be interface |
| Philips 29PT9418/79G MG3.1A chassis problem | I wonder if anyone out there can help me with this one, I have recently got an Philips 29PT9418/79G |