| Subject | Text |
| Replace as many electrolytics as you can around the chips, especially the ones near big resistors or |
| There is no problem in the video, except if I reduce the vertical height via service mode, because i |
|
|
| pls check | hi, i think your problem is very simple if u r technical background just check door compartment care |
| Ok, I had it fixed.. HAD
It seems Q514 was bad, I replaced it and turned it on.
After confirmi |
| This is a problem with the hp dv9xxx/6xxx/2xxx series and compaq v6xxx/3xxx series too. There was a |
| Re: METEX MS9140 | [quote:3589e45c87="ha3pg"]Can anyone help me with the schematic diagram and/or service manual of the |
| This si schematic for you:
Philips chassis Anubis S DD
http://www.eserviceinfo.com/download.php? |
| Just Opened it Up | I just opened it up. Too bad though i was referring to the manual in print. The quality's not that g |
| If my unit was doing that I would pull it apart and have a look.
First thing I would try is to fee |
| cmt-cp101 sound problem | i experienced the same problem for the same time today after 4+ years of trouble free use.
came on |
| Hi
Its not the same type , but you may savely probe equipment with this fuse
F = working fast
|
| THOMSON CONVERTER | [b:e387a06cc1]MY FRIENDS COULD SOMEONE KINDLY EITHER TELL OR POINT ME IN THE DIRECTIONS FOR THIS CON |
| Triacs? you meant to say transistors as there is no triac here. Why change them? Sounds like you ma |
| What is typical failure of smoothing caps in power supplies | Hi,
I am attemting the repair of a JVC AX-211 amplifier circa mid80's.
I have identified & r |
| Re: Sony KV-27TS27 No Color | [quote:0806ca3662="Anonymous"][quote:0806ca3662="rgionet"]Frank,
I tried to access that website you |
| philps hdd060 mp3- HELP | the ac/dc adaptor didnt work. (5v 2a output). philips wanted 50 quid for a new one, but i bought one |
| a most siple ... | a most simple temperature interface is germanium transistor B,K, to multimeter.... but is better to |
|
|
| If you get a diagram you can see what you are soldering:)
If not, replace the electrolytics around |
| How to protect the IPC- M-109 and the industrial component | The plastic sealing and packing is becoming a standard way when the electronics component develops t |
| Re: Basic questions about TV | [quote:27cda00d7c="Rouslan N."]I am repairing a TV for the first time and have no experience\knowled |
| Re: Code for Peugeot 206 radio | [quote:03e1611970="laptop2"]Hello :)
I happen to have the habit of losing my radio code, I've paid |
| this is for for the 11ak46
SERVICE MODE INSTALL.4725
this is for the 11ak37
SERVICE MODE (MENU TH |
| It is more likely that the pins with 76 ohms to ground are inputs for horizontal and vertical sync.
|
| D52W19 Flyback | I am having the same problem everyone else is having with this tv. Power light blinks three times an |
| Problem to unload information. | :cry: I am presenting problems for the service manual unloading of the chassis L9.1 de Philips. Af |
| :idea: Wow, that is an oldie. as a matter of fact used to sell/Svc Vector research & liked them |
| Re: Nissan Primera SVE Service reminder | [quote:5c34920c23="ourbabyboo"]I'd been told by my Nissan dealership that the mileage before service |
| The H3-01 error refers to Heat roller high temperature detection
error.
[email protected] |
| I did try connecting a probe and shorting it. Was that not adequate? Oh no! I hope I haven't killed |
| Sony KLV37s400 | I've been hassling with a Sony KLV37S400. Turns on fine, then turns off at random times with a loud |