| Subject | Text |
| Spectroniq PLTV-3250 wont start | Hello
I am working with a spectroniq (proton) model PLTV-3250
LCD TV. The set will not start I fo |
| Check for faulty resistors and capacitors at the output of Power amplifier IC 7100, 7200 and 7300. |
|
|
| The 'K' as part of the resistor specification represents tolerance. I think from memory it is +-10% |
| WTD: S/Ms Sharp R-9Hxx microwaves | Hi all,
I'm looking for service manuals (or at least their circuit schematics with keypad diagram |
| gigaset 3016 | can anyone advise me where to get a repair manual for a gigaset 30016 series cordless phone. cheers |
| There are many IC like this, made by Philips, which are controlled by a 2-wire I2C bus, i think they |
| Mitsubishi projection TV- picture squeezed | WS-55819 HD 1080 Medallion series |
| SONY PC<->Display ( EEPROM programming ) interface | Sirs,
If want to access eeprom data contained in the SONY GDM-F series displays you need this. A |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| TDA836xx (circa 1994) series TV processors were designed and aimed for analog television---way befor |
| Heat Transfer Compound | It seem there are many different heatsink compounds on the market, silicon, zinc, hardsetting etc. N |
| Playing around with power transformer output voltage | I have a transformer from a junked UPS. There are two primarys and a heavy duty secondary. If I fee |
| Is the HP Laserjet 1320 similar to the 1150/1300 series? That manual could be of use to you. |