| Subject | Text |
| help me please !!! | Hi, I have a technical problem with a TV PROFILO CROMA 202(28" 4:3) and I really need your help beca |
| FAULT IS 99% CERTAIN TO BE IC7064 PAINTER IC, UNLESS YOU ARE USED TO WORKING WITH SURFACE MOUNT COMP |
|
|
| PHILLIPS TV SPEAKERS | HELLO, To begin with the addition of speakers to a unit has to involve the understanding of the tot |
| chasis a10e philips | Hello
I want to change the chip painter position 7064 (micro) of a chassis philips A10e
I nee |
| HELP MIII PLISS WANTED CODE 22RC465/35 | :roll: :shock: Posted: Sat Dec 29, 2007 4:54 pm Post subject: agradeceria me dijeran el codigo |
| Lack of width LO4e Chassis (Philips 32 pw 6518/05) | Have you tried a new painter chip?
These can give all sorts of problems, from stuck in standby to |
| as usual fault will be the painter ic, this ic is responsible for 99.9% of faults on this chassis |
| Philips A10 Chassis - no picture | Hi,
i've got a Philips A10 based set that was working fine, until moved during decorating. Now th |
| if the line output stage is running, ( quick check is see if the crt heaters are lit ) then there a |
| switching to av1 | if it is sa10 chassis it will be the painter chip very expensive :cry: |
| replace the painter ic with updated version, not a good idea to attempt unless youu are confident wi |
| Tv. Philips 27PS55 S121 Chssis 27M800 7603 WHITOUT AUDIO | :shock: :roll:
Philips 27PS55 S121
Chassis 27M800 7603
JUNGLA- MICRO TDA 9587H/N1/3/04 |
| Oh just one more tip. When you replace the painter IC, the set does some kind of initialisation the |
| Code for CHRYSLER | I need code for CHRYSLER
Model P05091650AB
SERIAL NO. T 00 AM 209 3 M0007
THANKS!! |
| philips service mode? | How do you enter service mode for philips tv with painter chip. I think its A10 model.
Cheers,
St |
| Is this a symptom of Painterchip failure or incorrect set up codes?
If the latter can some one s |
| i have had at least 4 a10 philips where the painter chip was the cause of remote control failure, so |
|
|
| hair dryer | I had a similar problem. My set would not switch on. I just get a pop every second, sometimes it com |