| Subject | Text |
| Looking for a part for Grundig Classic 960 | I'm trying to repair a Grundig Classic Model 960 (vintage reproduction) for a friend. It's about 2 |
| Help 4 u | This problem is almost always a dirty open contact switch with various positions on the bottem most |
|
|
| Won't Start - 3 clicks and out? | I have a 32" ProScan that started doing the same thing. When I click the ON button it sounds as if |
| Found the leaky diode!!! 8)
It was D817, rectifier for the circuit with C813 (4700uF 16V) in, wh |
| F16 "Up Switch Defective" |
| Front powerswitch pin location on MS-6577 ver 4.1 motherboar | Trying to connect the power switch, reset switch, etc. onto the motherboard, please help |
| TV SET REPAIRS | :D If you are in any doubt as to your ability to undertake any tv repair-dont!!!
There are certain |
| [quote:d57196dda1="Cleanalby"]Never tried to hide it my friend. Here, in case it does not show up an |
| projection T.V. turns off by itself | I too have this same problem with my T.V. ( Pioneer SD-P5191-K )
My T.V. us |
| You must replace S301 and S302 (switch ) on front panel with switch that have gold contact
Regard |
| Shocking Panasonic TX-21S1T | Hi, I'm new!..
I've got a Panasonic TX-21S1T telly..
UK version..
When I switch on or of |
| need code please | MERCEDES-BENZ
BECKER
AUTOMOTIVE
Made in South Africa 24 volt
EC 112
Q07
Typ TRUCKLINE CD70
Mo |
| PSR 630 | Hi Everybody!
I have got a big problem. My YAMAHA PSR630 is went out. :cry: Display has broken and |
| TV Problem LG with circuit MC-84A | Hello,
I am trying to repair my personal use TV, its LG made with circuit MC-84A.
[b:38baa0cc4 |
| remote control URC24 | Hello,
These universal remote works fine on most devices !
First, you have to program the remote |
| Thanks for all your help.
I've since discovered this is a PT92 chassis which, apparently, is used i |
| Re: TV freezes on channels, can't change | [quote:1b92f2ebef="sweete958"]I have a 32" Magnavox TV set that has lately been freezing up, not al |
|
|
| I had the same problem and I solved in this way (cut & paste from nl.hobby.video newsgroup messa |
| Philips DTR 1500 | Does anyone know who to fix a philips DTR 1500 Digital Terrestrial Receiver.
You switch it on and |
| Re: Brightness | [quote:55f2884649="Mel"]If you can go to the menu function with the remote and adjust it there, you |
| Well I replaced C707 (blue cap) and the 2A pico fuse (E994). Set is back in service - still a great |
| LC 4341 | 1/ check DC value (+295V DC aprx.) on the PowerSupplyBoard unit -output DC power for ballast unit
2 |
| DELL 1025he ,chassis Nokia 447S service menu | I have this monitor. I need adjust black screen( R G B cut off).How I can switch to service menu?Is |
| help about multimeter metex M3850-D | Hi all
I have a problem with my multimeter tester Metex. Lately it happends that I cannot turn, I |
| Re: philips l01.1e | [quote:ad5ed54760="terminator2k2"]hi all just wandering if some one could help me.?? i have a philip |
| TV codes URC22D/URC22D-8B,8,8A / URC 24 | Hello ,
I send you some universal codes, I don't know if they work, some people told me it didn't w |
| updated | Hi
I have updated with nwe software , but its remain the same , after detecting new programs , goi |
| Toshibas and the like | Hi there Larry and Tibor,
last night I repaired my Toshiba. Larry, you are completely right, the |
| kenwood UD701 service manual, pease! | Hi my system remains always in stand-by, the power button or remote control doesn't switch it in pow |
| Scart Switching | My PT92 doesn't switch to AV either (very annoying). It does switch to RGB when I tell my Sky box t |