datasheet,schematic,electronic components, service manual,repairs,tv,monitor,service menu,pcb design
Schematics 4 Free
Service manuals, schematics, documentation, programs, electronics, hobby ....


registersend pass
Bulgarian - schematics repairs service manuals SearchBrowseUploadWanted

Forum knowledgebase search
Searched for: ptc, Found: 24 lines
SubjectText
ptcfor one thing in your set it isn't part 3507 its 3523 and its a small white square part next to wher
There is no problem in the video, except if I reduce the vertical height via service mode, because i

Please explain the repair a little more thoroughly..Minnie, Could you please explain the repair for the 27pt6441/37 a little more thoroughly?: 1. Wher
Remember that, in order to activate the degaussing circuit, you will have to turn the tv off by the
A normal computer power supply (switch mode power supply, SMPS) will work very well on DC. But yo
fixeasy fix, fuse and replace the PTC
Philips 27PT6441/37 won't stay on chassis L04.1U AAHelp Please!! I have only had this tv for about 12 months. And it don't want to stay on.When I go t
If it is a conventional CRT tv and the discoloration is there also when viewing a monochrome picture
[quote:34a66ffa1c="minnie"][quote:34a66ffa1c="Anonymous"]What is the PTC?[/quote:34a66ffa1c] ? They
Re: hitachi 51f59a turns on then right off[quote="zonie"]hi I have a hitachi projection tv 51f59a. 3 yrs old. All of a sudden when i
Thx for the many helpful advises... 8) The problem seems to be solved. The inner Degauss coil
Not true. Any external magnetism can override the degaussing circuit and in particular the ptc or nt
I changed the thermistor because it needed to be changed. That is the common prob with these models.
philips combi tv-vcrhave a problem with a philips tv-vcr combi,chassis mono98 the ptc is broken,type T209 9825??? i c
D- Gauss u/sLissen Whippersnapper- all you have to do is remove the PTC unit & r/p with good one of same cha
[quote:6cbdf37b8f="Anonymous"]What is the PTC?[/quote:6cbdf37b8f] ? They have the wrong thermistor
[quote:e0055b1634="Anonymous"][quote:e0055b1634="minnie"][quote:e0055b1634="Anonymous"]What is the P

Yes, PTC is faulty. Degaussed the TV with the wand and replaced posistor and all good now! Thanks
Not true. Any external magnetism can override the degaussing circuit and in particular the ptc or nt
[quote:e3543b989f="Anonymous"][quote:e3543b989f="minnie"][quote:e3543b989f="Anonymous"]What is the P
it can be PTC.
Re: D- Gauss u/s[quote:3510e051a8="Old Bassid"]Lissen Whippersnapper- all you have to do is remove the PTC unit &
What is the PTC?
Thanks for the advice. I don't think that a magnetic filed would be the problme in the cabinet that

page: 0
 FB -  Links -  Info / Contacts -  Forum -   Last SM download : Aiwa NSX-D9

script execution: 0.03 s