| Subject | Text |
| I'm digging into it. | Here's what I've found so far. It's the first PWB in the power circuit with the rectifier circuit. P |
| Hitachi 50UX7KC Convergence | Hello,
My 50UX7KC Hitachi projection tv is having severve convergence problems. It will work perfe |
|
|
| * PROCEDURE:
o Clean the Spark Gaps on each CRT PWB.
o Remove the Cap, clean |
| Ford 20XX radio schematics/repair | Ford radio schematics are near impossible to find as they are only supplied to authorised sevive cen |
| I bought a service bulletin for my projection TV. It says the following:
Symptom:
Either Red, Gr |
| Gateway VX1120 or Mitsubishi 2060u Service manual? | Hello
Im looking for the service manual for either of those monitors, I search everywhere and I c |
| If the lite is green, and it's NOT IN THE POWER SAVING MODE, at connector cn 68 pin 6 if the voltage |
| Re: sony cmt cp101 low audio levels | I read this on Wednesday, ordered the transistor on-line as suggested, got the part this morning, re |
| 53SWX12B - Will not come on | [quote:58377dd4a9="minnie"]You could try and unplug the connectors going to it and see if the set co |
| JVC LT32x576 Green Pixelated Screen Problem | I've got a broken HD Tv. It's a JVC 32X576. It's a few years old and one day when turning it on the |
| Hitachi 32LD7200 - Dead with green light. | Hi there,
Been trying to find out whats wrong with this unit.
Power led goes green on power on |
| Hitachi 50UX58B | MY WAS WATCHING HITACHI MODEL 50UX58B AND IT WENT DEAD.
I CALLED HITACHI TV CO. THEY GAVE ME THEIR |
| Re: Green Convergance issue on 55pp9401 Board | [quote:2b54da10f3="aaronjwithrow"]I recently picked up a used set from a co-worker. It was working |
| Re: sony cmt cp101 low audio levels | Hi can someone tell me exactly what you have to do to fix the sound problem on the CP101 sony, I ha |
| Re: 53SWX12B - Will not come on | [quote:2a136a8e13="minnie"][quote:2a136a8e13="[email protected]"][quote:2a136a8e13="Anonymous"]So yo |
| Nec PX42VM3G | Hi dooney
sorry for the delay.
As regards the service account, my engineer asked to setup a servic |
| Shit! didn't want to do this but here we go.
Be sure to input the correct signal format for the d |