| Subject | Text |
| Basic questions about TV | I am repairing a TV for the first time and have no experience\knowledge.
-Is there really X-radia |
| Newsflash: TV IS FIXED!!! yay!
There was a hairline crack on the HOT emitter pad from changing th |
|
|
| In which country are you trying to use the fax machine, and which country is it initially sold?
U |
| Lol, I remember doing this as well. I'd crank the volume up, lick my finger and touch the pcb around |
| akai amp | I found another of this unit on ebay, not bid on for 99c and broken 7yrs. I got it eventually on my |
| Pioneer A 616 Mark2 | Some one have a servicemanual to this one?
Then i raise ore reduce the volume, the protection circu |
| To (maybe) clarify what LJ told you | All this assumes you have some means of measuring resistance and voltage. How much experience desold |
| Mitsubishi 43" tabeltop | well I bought the TV pulled the main board flipped it over and found 1 bad solder joint on one of th |
| Re: Soundtracs mixing board | Define "electrical" (smell of a charring P.C. board?, resistor?, transformer?, something t |
| Re: panasonic tv - URGENT HELP PLEASE | [quote:35c3b5b82c="pun"]my panasonic tv ct-32sx12 won't turn on, it was working fine yesterday.....p |
| Nak Pa-7 no power output | I have the service manual and passed on to tech (he had one too). He stated he verified all fusing a |
| Re: Benq FP567s schematics | [quote:516340f4b8="Tekno_dc"]Hi,
I'm searching schematic or service manual for Benq FP567s.
Th |
| It depends on the type of diode you are working with.
SMD applications usually need to be physicall |
| Sharp Microwave Work/night Lites will not work | The Work Lite and the Night Lite on my Sharp Carousel R1491 will not light. The touch panel beeps a |
| Hi i went a head and changed the Vert ic,and is not the ic,.Then i started to check around and foun |
| Toshiba 32AFX61 Shuts of suddenly, red light blinks | My 5-year old Toshiba 32AFX61 has had a couple of problems which may or may not be related. For som |
| switch,need to press hard to operate it | hi there,i have a NAD CD player,but the feather touch cd open/close button now needs to be pressed h |
|
|
| Larger connections and the ones that get hot may have a ring around them from constantly heating and |
| pls check | hi, i think your problem is very simple if u r technical background just check door compartment care |
| Soldering help needed., It don't flow right | I’ve made my first DIY PCB, I’m trying to solder Leds into the holes and I’m a complete newbe, I got |
| If the remote works just disconnect the front key pad? |
| INTERMEC NORAND 6642 DRIVER!!! | Hello
I have got tablet PC computer NORAND 6642.
Antyvirus deleted my all installation files. |
| RCA's new service menu | I was working on a fairly new RCA projection (R52WH74) and tracked down the new service menu access |
| sony str de 475 bad tuner | Hi guys;long time no see ; i need your help,
i have here a STR DE 475 sony receiver and it runs go |
| [quote:0ce861ca0c="minnie"]Did you unplug it, and plug it back in???[/quote:0ce861ca0c]
Minnie |
| service mode unlock - last resort | The solution of my problem was removal of the CPU ( HD404919 ). Easy to locate visually in the middl |
| When I press the "close" button the tray starts to close then stops. The little piston tha |
| Harman Kardon AVR320 going into standby for bizarre reasons | For those who like an intriguing problem, please read on. My HK receiver, about 6 years old, starte |
| wk 3500 keys stick when layering | I have a wk 3500 casio, using warm pad and layering trombone, or other combo's keys will not release |
| Resolder the IR board. I've had my fair share of Sharps where the key pad quits working and after re |