| Subject | Text |
| Schneider Scinema 3210 NVM Codes | Can anyone advise what are the default Schneider Scinema 3210 NVM Codes.
Service mode displays:
|
| Re: four-pin SCR | [quote:79ff8222cd="dubs_suzie"]How do you test a four-pin SCR to know whether it is good or bad ?l[ |
|
|
| Re: Service Manual for Pioneer VSX-D1S | hello i need the service manual as well something happend n all my speakers do not power up at all a |
| KD36XS955 | @Allen-5
Start by checking the power supply buses. Check voltages with a DVM and compare to the S |
| 53SWX12B - Will not come on | [quote:a0495f51d3="Anonymous"]So you got the TV for free and you're too cheap to buy a manual
Sad |
| Re: Electronics parts for TV VCR AUDIO closing down | I would be interested in all of your CD mech's and parts. Test cd's also. Please let me know what yo |
| Re: Audio but no Video on Philips projection tv model 8p4834 | [quote:bb4b048c59="thetechman007"]Hey There, I will try to give you a hand, If There is no filament |
| Re: TV Problem | [quote:ca5516462e="bigboy"]:D
I have a 32" Sony projection TV. Latley when I turn it on I am get |
| need manual service E17BL | Hi, my name is Giuseppe, i'm Italian. I have monitor Nortek E17BL burn. I repair it but the service |
| huh | [quote:2e4b832b38="Anonymous"]you cannot ever determine a good device. any tester will tell you as g |
| Try to first resolder the picture tube socket . Review all the picture tube board for bad solders. I |
| [b]SONY TV MDL# KV-27HFR Trinitron - No Picture after 45 Sec | [b:3b1fed15b4]Dear Admin,[/b:3b1fed15b4]
A bundle of thanks for such a wonderful Forum, I appreci |
| my Bush tv don't display anything on the tube | hi
my Bush Tv powers on to stand by, and when you want it to light up the tube it can't, but u wi |
| First some blocks during mp3 playback after few weeks completly power-off.
Fuse are ok.
At first l |
| Any experience with BAPCO IEC601L Universal? | Using a BAPCO IEC601L Universal Safety Tester for Leakage Current tests. Recently back from Calibrat |
| Help needed repairing a Ferguson set with TX80 chassis | Hello all
I desperately need help repairing my wife's TV set, it was given to her by her late gra |
| 36 in Samsung HDTV lost pix and power | my 36 in samsung hdtv (tube type not rear proj.), only 1 yr and 2 months old, lost pix and won't pow |
|
|
| Won't Start - 3 clicks and out? | I have a 32" ProScan that started doing the same thing. When I click the ON button it sounds as if |
| Vector Reserch | That's a lot of help Ray and Thanks for the help.I'll probably just proceed with the repairs as if t |
| Replaced all transistors | My transistors have finally arrived i've replaced all 4 and 2 further resistors that were connected |
| since you have a VOM/tester, set it to X1, be sure to discharge the largest capacitor u can find in |
| Looking for a Magnasonic Model 5522 schematic. | Ideally I am just wanting to know which CRT is being used in this set as it is missing it's labels ( |