| Subject | Text |
| Replacing busted DVD Player with a PC IDE, DVD ROM? | Hi all,
Does anyone have experience with replacing a bad DVD loader in a DVD player with an inexpe |
| Replacing a power supply... | ...consumer electronics product: Audiologic color tv/cd/radio portable unit. I burned the power supp |
|
|
| more info on replacing the parts directly | I have some help to give if you have the exact same problem.
When you power up the screen, brief |
| Done replacing DSP capacitors | Hi,
Replaced the capacitors, and it seems to have worked fine. Verified sound in at least four c |
| Replacing a Hardrive on an acer extensa 501dx laptop | how do i take the laptop apart, to replace the hardrive, I have unscrewed everything but it seems to |
| Need help with replacing a board in a lg plasma | Hey guys
I just joined up here. I was given a LG plasma t.v (42PC3D) because the screen stopped |
| This is turning more into a blog :-) Anwyay, I'm thinking of replacing the diode with a generic UF40 |
| Grundig CUC 1825 problem | I have Grundig cuc1825, after replacing procesor SDA 5250, TV won't respond to remonte control !
Wh |
| Mark you're on the right track. Try replacing your convergence ic’s. Don't forget to check the bias |
| "Distorted" is too generic to understand what your problem is. If the customer convergence procedur |
| Alek (or anyone)
Not built in. What needs replacing?? Can anyone describe what to replace - if tran |
| Busted Sensor - Misconnectecd. | I have a sensor circuit that was misconnected (DC was connected to output signals.. :( ), I have che |
| Try replacing IC801 STRS5241 |
| Sony KV-35v65 hv short | Many people distribute a parts kit for this model of television. It
includes a dual power supply t |
| Having worked on many pioneers, am very familiar with your unit; Reason is rejecting, coz it's not a |
| The 2100 was a Whole Unit Replacement (under warranty) printer. No work was performed on those units |
| Similar Problem with my Sony STR DE535.... | I have a Sony STR DE535 that kept "Blowing the 6.3amp fuse on the "Standby-Power" board,that is unti |
|
|
| Try replacing the cables. Or you have a video driver problem if green drops out. |
| 50" zenith tv convergance issue | I have a 50" zenith television that i just replaced the hv splitter and focus block on. Originally, |
| Do not have the T-230 schematic, but I think it was similar to T-240. As far as backup on any digita |
| data sheet | I was delighted to locate a data sheet for my MASTECH M-830b multimeter.
I have blown R5 and R18 an |
| Ever since televisions have switched over to the modular system, finding specific diagrams are rare |
| [quote:d3bff1203a="jts1957"]R561 should be [color=red:d3bff1203a].33[/color:d3bff1203a] ohms betwee |
| Toshiba SD-V291 VCR/DVD combo ejects tape immed after load | Hi. Above noted machine loads tape, but then imediately ejects the tape. I removed the cover and t |
| Sony CCD-TRV43 | I need a service manual for a Sony CCD-TRV43 camcorder. Also, need advise or tips on replacing the |
| hello. does anyone having any ideas or advice? anyone having any troubleshooting tips, or should i |
| Based on your description, the diode in question is perfectly fine. I have never heard of it being c |
| @Guest | @guest who recommends to replace all caps of the vertical driver unit
Okay, I agree that might be t |
| Xbox 360 wireless reciever | so this is a chinese knock off right. I have used many of these in the past, but none gave me any tr |
| Hv u check the vert. IC? I had a similar probl with a JVC 21" and fixed it by replacing the IC. :D |