| Subject | Text |
| JVC GM-V42UG plasma monitor problem | Hi all. I'm new to tv repair and plasma/lcd technology. However I know my way around pc motherboards |
| Unless you have some experience with mixing boards, that is not something to tackle. You'd at least |
|
|
| Philips part #483531057554. This remote puts the tv into a service mode, or it should. My biggest pi |
| Hitachi 50UX58B | Found quite a few parts are still available from original manufacturer. There are quite a few parts |
| transformer smokes | I am repairing a power supply for a scientific instrument. When I recieved it, it would not turn o |
| Re: Blinking green light of death | [quote:09f2614160="zee"]Hello, I hope someone here will able to help me out. Im having problem w/ Mi |
| am I getting hosed on repair costs? (Hitachi 50UX58B) | Okay - my 50" Hitachi Ultravision - 50UX58B (1998) set went bad days before my Super Bowl party. I r |
| I don't think the filter capacitors should be affected, it is more likely that the problem is leakag |
| What you seem to experience here is called "chanel drifting". In most cases replacement of the tune |
| 1st item) Because you don't seem to have any high voltage, I'll would start by checking the HOT (lar |
| Sony XR-M510 Code in | Hello
Sony car audio system after auto battery replacing flash (code in ) in its display and I dont |
| astra console display | hi, wonder if anyone can help...after replacing my mk.4 astra stereo with a better one, the temp/ ti |
| TDA4600 / Chopper Transformer | I am trying to repair a Ferguson T.V (TX100 chassis) which just went dead while switched on.
Init |
| Start by replacing the two STK392-110 IC's on the power board and also check all the resistors aroun |
| You need to take this to a service shop that is capable of or does RF connector replacements. They |
| Microwave | If you heard a "POP" and now a loud buzzing noise, it's one of 3 things
1) the rectifier diode on |
| flyback transformer help! Im desperate! | Hi, I have purchased the gboard for my sony kp53s75 projection tv. I am in the process of replacing |
|
|
| Dry caps. Try replacing c301 & c305 both 2.2uf 50 volts. |
| PTS?
thing is, having seen quite a few of these.... why is the main board suspect?
replacing a b |
| VP322 not working | Hi DigitalScorpion,
Same thing here. TV logo is orange and turns to white. I replaced the bad cap |
| Hi.
Ans 1: It is not recommended to use a power adaptor that has a different rating; especially s |
| sony KV29X5U | Flashing 4 times / Suspect frame Collapse Can you advise reference part Number & IC requires rep |
| before replacing ic 7064, you should try to put a 10 nf capacitor between pin 4 et 11 of that circui |
| Daewoo Plasma dp42 dead | I have a plasma screen which gave up the ghost. it simply wont turn on! apparently there is common p |
| Wow thanks for the quick reply and specifics. Is replacing it as nightmarish as replacing capacitors |
| Yes, the F fuse is a fast acting fuse which is supposed to blow before damaging silicon devices like |
| Have been out of consumer electronics for some time...I used to see this problem on a regular bases |
| How would someone go about replacing this? I couldn't find any instructions online. |
| Hi,
Thank you for your kind help John.
Since it's chassis L01.1E, I will check diode 6406.
|
| Philips 29PT6231 Dead with stdby light blinking | Thanks buddy. I've got a copy of the service manual for A8.0a chasis. After replacing the hort outpu |