| Subject | Text |
| CHASSIS
HP-1X
MODEL
HP-11
50DX10B, 50DX20B, 50FX20B, 60DX10B, 60FX20B
Resistor Location |
| Replace the STK392-110's. Could be STK392-150's. Resister values:
Resistor Location Value Par |
|
|
| RK42 2.7 ohm
RK46 2.2 ohm
RK50 3.3 ohm
RK54 2.2 ohm
RK58 3.9 ohm
RK62 3.3 ohm all 1 watt
htt |
| [quote:ea6d52af32="minnie"]Replace the STK392-110's. Could be STK392-150's. Resister values:
Resist |
| RK42 ok, RK46 bad, RK58 ok, RK62 bad, RK50 bad, RK54 bad. It's called a catastrophic failure. Change |
| Replace IK04 and IK05 with STK392-180's, check RK46 1.8 1 watt, RK42 2.7 1 watt, RK62 2.2 1 watt, RK |
| Check the bias resisters.
RK42 3.3 Ω 1 W AT03202S
RK46 1.8 Ω 1 W AT03195S
R |
| Q706 shorts or if it's convergence IK04 IK05 check RK42 RK46 RK50 RK54 RK58 RK62. |
| STK392-110 - STK392-150 -STK392-180. I use 180's. Someone replaced the STK392-150 with a 110 or vise |
| [quote:07fb75fce3="minnie"]If it's a clicking/pulsing noise suspect IK04 and IK05 the convergence IC |
| tv | [quote="Anonymous"][quote="minnie"]Replace the STK392-110's. Could be STK392-150 |
| The wife said the picture went a little fuzzy before they shut it off and when my son try to use it |
| i bought the tv new and its never been worked on . chassis #DP23 .RK42 4.1 RK46 2.5 RK58 4.9 RK62 2. |
| Re: convergance | [quote:a560585d46="madman666333"]i am trying to fix a 53fdx01b. i have the new ic`s but am not sure |
| [quote:bb35ab8f75="minnie"]RK42 ok, RK46 bad, RK58 ok, RK62 bad, RK50 bad, RK54 bad. It's called a c |