| Subject | Text |
| 200/300W power amplified speakers | Hi all,
I need help to find out a good complete project for internal amplifier system for speaker f |
| I have same problem with my tx-ds494. no its not my speakers. or inputs, definately output in "A" sp |
|
|
| Sony Trinitron KV34SL40K | If anyone could please help me with this TV problem
I would appreciate it very much.
Power supply( |
| Heh, sounds like you've got a bunk VGA cable that's causing echoing. If it supports it, use DVI (a l |
| Hitachi 50ux58b won't stay on - weird pico fuses? | OK, I've been trying to fix my TV for a few days. I got a kit with the replacement E994 and C707. I |
| Toshiba 3787DB - Very low Base / Woofer output | Getting a very low output on the sub woofer, with the sub and the base turned all the way up you can |
| Sony Sa-va 700 | Hi! I am having problems with my system. The right side rear speaker keep turning on and off. I chec |
| hardon karmon 7 channel amplifier, 1 channel very low ?? | hello im curretnly working on a hardon karmon avr 507 7 channel amplifier,
it all works ok apart |
| Philips 29pt5515/58 TV service menu problem | Hello. I have a problem with the horizontal phase of philips 29pt5515/58 tv. The picture is shifted |
| Yes I can get into service mode and change any setting available. But no matter what I try to change |
| PHILLIPS TV SPEAKERS | HELLO, To begin with the addition of speakers to a unit has to involve the understanding of the tot |
| Taking apart my Philips DECT 2111S/11 | Hi,
I am trying to take apart my Philips DECT 211 phone, because the speaker has managed to come |
| NEED OF LABLES AND COLOUR CODES | [quote:1c55de7d09="Justmanuals"][quote:1c55de7d09="sflsan"]First off, how am I going to die?
And |
| Pioneer Elite 7.1 issues | My receiver turns on and off, but stays in Phase control the entire time its on. Its an 07 model, an |
| Sony Amp - The woes continue | Andreas,
Try removing every input and output and see what happens, then add them back one by one |
| str-de945 problem | Is the action (or lack thereof) intermittant? If so, it is likely a bad solder joint. The IR sensors |
| SONY STR KSL5 Protect Fault | I have a SONY STR KSL5 home cinema system which after about 5 mins shuts off with the word "PROTECT" |
|
|
| Ok, out of the 17 pins on the cable, eleven pins are used for different voltage/signal levels. The |
| New version 3.0 beta of PinoutMaster available for download | New version 3.0 beta of PinoutMaster available for download ( thanks to Profegramma Software)
Feat |
| Here's the parts that I used:
[url=R509 100K Ohm 1W resistor[/url] - got an set on Amazon. I prob |
| yeah! tv still working but, always need to push the reset button in front. otherwise no signal with |
| repairing an old sansui amplifier | hello every one ,
new member here and also newby in the electronic repair
i have an old sansui |
| The balanced connections use a shielded twisted pair cable, the two twisted conductors carry the ori |
| The easy button is send the D board to Sony for phase 3 repair but Cory is also correct. Last board |
| Re: medeion lcd monitor fault | [quote:dc203be484="ekim"]hi all
im having a problem with my medion md 30917 pn monitor,
its stoppe |
| Dead Black Diamond BD28WS | Hello to everyone this is my first post here. I have a BD28WS Black Diamond TV. The fault is when I |
| Looking for Pioneer VSX-D307 Receiver Service Manual | I'm looking for a service manual (or at least a schematic) for my Pioneer VSX-D307 Receiver.
Anyo |
| voltage for relay | hi,i have a problem on my yamaha rx-v392 model...i need to know what is the voltage of the relay in |
| Philips 29PT9418/79G MG3.1A chassis problem | I wonder if anyone out there can help me with this one, I have recently got an Philips 29PT9418/79G |
| I would not recommend using transformers at all in a power factor meter, in order to avoid problems |