| Subject | Text |
| Re: [b]Need schematic for MP3 input upgrade[/b] | Hi Iztok,
On same radio I have same problem with volume controll when car-radio is cold it canno |
| Checking ultra fast diodes | newone:
You can't check the SPEED of ultra-fast diodes with analog meters.
You can check forwa |
|
|
| >Can i put it in the place of dvd rw
You can, but the hd will work at the data rate of the slo |
| [SERVICE MANUAL REPAIR] MINOLTA AF 300 mm 2.8 HS G | Hi.
I'm new here and I'm looking for the Service Manual Repair for the optical lens Minolta AF 300 |
| sir/maam... sony has 10 blinks no video...just because the sysytem cannot detect the video signal c |
| Hi Minnie,
My Braun EP100 uses a mains cord plugged directly. ( No external pwr-supply. )
The ci |
| ITS MORE LIKELY THAT THE LASER PICKUP ASSEMBLY HAS FAILED, THE MOTORS DO NOT USE A CONSTANT SUPPLY, |
| Hi m8
Dont know if this will help but my brother had the same problem and Sony replaced the tube |
| Samsung Air Conditioner IAS18WJWB/XTC Service Manual needed | Hi all. I am looking for a Service Manual for a Samsung Air Conditioner model AS18WJWB/XTC. This is |
| Yes, I have blown more fuses than I care to admit in my ammeters. It is definitely something to avo |
| Studioworks 775n (CB775BN) brightness adjustment??? | Hi all,
My monitor brightness controll is 100% on the OSD & my monitor is still darker than it |
| Hi to you all newbee on forum would like some help please | Depends on the use but I would use a pulse width type like the one in the link below as the D.C moto |
| Never heard of anyone doing this before. Just stick the module in. No programming should be requir |
| bad system controll ic..replace it but it cost a fortune!! |
| Help me use a zener diode | I am attempting to understand how a zener diode would work in the following application:
This is |
| How to protect the CD-R? | 1.The main influence to the durability of CD-R
Temperature and humidity are the most basic and |
| [quote:1625186540="annvin"]What's TRIAC? I have no idea about it. Could you please tell me something |
|
|
| Re: MItsai Basic TV 37 cm | [quote:6171dba87c="michi2"]HI all,
I got an old tV MItsai Basic TV 37cm perfect working. But the re |
| philips 28pw6515/05 | I have an old philips 28pw6515/05.
The on screen display is intermittently flickering up down the |
| far more involved than just changing the tuner, in is not practical to convert the machine, there ar |
| Please code Becker | Please code for my
Becker traffic pro high speed
model BE 7820
SN 45072116 |
| Re: code becker be 7820 | [quote:a47bbd7c30="bargougui"]can someone help me with my Becker traffic pro high speed?
Model: BE |
| Sony VCR problems | I have a Sony VCR that rewinds\plays at a very slow speed, then after ~2 sec. stops, and the mechani |
| This is not a stepper motor, it is an ordinary DC motor.
I found some data on a russian website.
I |
| sony parts | We offer sony original spares as per part codes.
Pl.e mail and experience the speed accuracy and ec |
| [quote:0c9202a23f="ronw_57"]Hook up was with composite cables to get high def picture.[/quote:0c9202 |
| As far as i was aware there wasn't a REAL service manual for this Plasma!
Anyway, I exchanged the |
| Are you still able to put the TV in stand-by mode (with the remote controll)?
(and does the flash |
| power supply problem and what to replace? | hello,
I have a photographic enlarger with a voltage-controlled transformer. sometimes when i power |
| Canon EOS-1D Mark II N, 8.2 Megapixel, SLR, Digital | CAMCORDERS..& CAMERAS:
Canon EOS-1DS Mark II, 17.2 Megapixel SLR Digital
Camera--$900
Canon E |