| Subject | Text |
| The DCU/convergence generator stores the information. If 480 is good and 1080 is bad, I would suspec |
| philips 29PT5515/01 random switch to EXT1 | a noise signal is getting through EXT1, making the tv to automatically switch to that channel, back |
|
|
| ahhh I think you must adjust your horizontal linearity,its near at the horizontal drive section. If |
| Philips VR657/02 | Hallo, I'm searching Service Manual of Philips Video VR657/02, exactly Video Signal Board
Has anybo |
| no no, if you click on 1st TOSHIBA on that page & scroll down to 21N21.
I'm pretty sure the o |
| Hello, I need operating instructions and schematics of the Metrix GX933 generator.
Thanks in advan |
| it's weird. i've soldered the tape send (pin 13 to 15) to a cable that goes in this other stereo sys |
| Toshiba 2050RE | I Have 2050RE model Toshiba Tv it has no RF signal. Is it the tuner was defected. an use other model |
| Panasonic NV-DS65 problems | Does anyone know why a Panasonic NV-DS65 miniDV camera would not play a tape... it will not play the |
| [quote:97eef1088b="Anonymous"]please forum members is there anybody there, Moderator I'm desperate![ |
| If the tv suddenly got a convergence problem, then there is a "real" fault that should be |
| It would definitely help to be able to see thru the ckt with scope but measuring DC levels can be he |
| Hmm...I've measured resistance for both the signal wire and ground wire all the way from the stylus |
| Update to Sony KV35V76 on / off Picture | The KV35V76 is part of the KV32V36/32V36/34V36C and KV35V35/37V36M family
When the picture disapp |
| You can try to put a 400 Volts rated capacitor across the 230 Volts motor terminals. (50 to 80 µF.) |
| LG 47" LED/LCD Tv with no power - Model 47LV4400 | The TV has a red power light on the front but pushing the power button on the TV or using the remote |
| check out | if you have multimeter ...check out for all speaker outputs for signal (AC ~20V) |
|
|
| Sony KPR-36XBR | Just bought this at a sale. Brought home, set came on but had contaminated green crt fluid. Changed |
| Tektronix TM 515 w/ PS 501-2, SC 501, FG 501, DM 501, DC 504 | I have a Tektronix TM 515 mainframe with the following plug-ins. Due to its portability this unit i |
| IT is not convergency if you mess with that god help you then you need a generator to get it right o |
| [quote:21853667a5="vtech"]Without being able to see more of the equipment, it would have to be a gu |
| I have finally Isolated it to one circuit (V. BLK) When I remove (V. BLK) going to the signal board |
| As far as SMD diodes, it is next to impossible to determine the exact part numbers without the docum |
| Compaq Monitor V700, schematic diagram | Hello,
I work at GM Antwerp, Belgium, and we have 9 defective V700 compaq monitors, all with the |
| philips monitor brilliance 150p | I got a philips LCD monitor brilliance 150p.
I hooked a pattern generator to it.On the right side I |
| [quote:6bf443bc09="Anonymous"]OOPS... p/n I replaced is [b:6bf443bc09]23786221[/b:6bf443bc09]
Phi |
| Re: philips 29PT5515/01 random switch to EXT1 | [quote:27ac07e204="Arinemot"]a noise signal is getting through EXT1, making the tv to automatically |
| philips 29PT5515/01 SA10 freezes on starting channel | tv freezes on the starting channel, it doesn't respond to remote control (working for sure, tested s |
| More likely smal signal JFET transistor 2SK30A --- rather reliable device
How do you know they ar |
| Need suggestions of multitest units like the elenco mx-9300B | Incase no one knows what this unit is, http://www.esssales.com/elenco/all-in-one.html
I need a te |