| Subject | Text |
| Repair to a 11ak19P4 chassis, goodmans widescreen | I have 2 wide screen Goodmans Tv set that have the same fault.
The TV powers up and comes on when |
| Vtech,
I really appreciate your input, thanks so much.
No there is no bottom access panel on this |
|
|
| Toshiba 27df46 wont turn on | Hi guys,
First post and I did read forum rules so hopefully I wont get flamed for idiocy.
Ill t |
| Re: Tektronix 422 | [quote:da0218760b="ninelives"]I have a Tektronix TM 515 mainframe with the following plug-ins. Due |
| Horiz output | Ahh I get it now,
I would like to scope the base signal while lamp load is on and measure frequency |
| I agree with Miguel. if your mixer has PAN controls just turn all of them to the same end so your ch |
| Proscan service manual | I work at ACE TV in Las Vegas,NV I need the signal board secondary power supply schematic. Voltage t |
| Sell Instruments | Miko-Kings Instruments Ltd http://www.miko.com.hk
Miko-Kings Instruments Ltd., hereinafter called |
| Try supplying a 1 kHz sine signal from a tone generator to an AUX input and look at the output signa |
| I traced back to the input of the motor control IC (SIP #BA6209N) pins 5-6 and do not see a logic le |
| Sanyo 27" TV Problems | Having problems with TV signal coming from Satelite decoder. Signal keeps coming and going. Not a sa |
| Repare of Samsung LE26R51 | Hi,
My Samsung LE26R51 LCD TV has a problem, if will not power on!
The red LED just it flashin |
| Re: [email protected] | [quote:e0b3a37a3c="robtv"]Thanks for the input,
I was wondering if y |
| DC Motor C4557-60003 from HP deskjet printer | I tested this motor,
it starts turning at 1V, very slowly. I was quite surprised by this.
At 6V it |
| In order to measure the output of an amp, you would need test equipment;
Load resistors, scope |
| re; Mitsubishi | Hi, try inputting a dvd signal into "video input 1" then if you get a picture
it probably is a tun |
| Re: Toshiba CF27E50 | [quote:463007264d="draeservice"]Hello,
I have a Toshiba CF27E50 television. When I turn it on, i |
|
|
| Samsung Monitor Distortion | I have a 955DF flat-screen CRT monitor that Ive owned for around 4 years. About a year ago I started |
| [quote:3abd774048="awright"]Well, yeah, you are messing with relatively high power equipment and can |
| Here, local company Evrocom uses SAWDEC by ARCOM. They transmit at 2 frequencies. I have an original |
| TV Problem LG with circuit MC-84A | Hello,
I am trying to repair my personal use TV, its LG made with circuit MC-84A.
[b:38baa0cc4 |
| I have the exact same symptoms with my 510.
It Worked perfectly for 5 years and now i have to unplu |
| If you are talking of a device, which works with sound - it is no problem to construct one. It is a |
| Remember;
When talking about "impedance", it is actually the resistance of the speaker |
| Can anyone help identify... | Hello,
I apologize in advance for the poor pic as it came from a small pic in a magazine scan but |
| thomson tx92f | hello,
when connect the arial or receive a signal the tv (thomson model tx92f )return to sandby wha |
| It sounds like an earthing problem. How do you have your new lights earthed? Doors sometimes do not |
| With record decks, you have to connect a separate chassis ground wire between the record deck and th |
| PHILIPS PM5519 USER & SERVICE MANUALS | [size=18:58655338f2][/size:58655338f2][color=blue:58655338f2][/color:58655338f2][b:58655338f2]PHILIP |
| I found out what it is | Ok the first guy whom was paid to come out and look at is was 100% wrong I finally got a place from |