| Subject | Text |
| SCMI---Great Test & Measurement Software for free downlo | website: http://www.virtins.com
PC version: http://www.virtins.com/SCMISetup.exe
Pocket PC Versio |
| Thanks for the tip.
If I put a voltmeter on those leads, what's a reading over which I'd need a |
|
|
| Wanted Service Manual Kenwood PD35-10 PSU (Analog meters) | Hello I am the owner of one Trio Kenwood PD35-10 Power supply, thankfully it does not have any damag |
| Yes, as you mentioned, 24v should be fine.
Remember though, if you have "burned" parts |
| Problems with Sony SLV-E600B | Hello,
My old, but not so tired magnetoscope is without picture. But song is ok.
Alimentations s |
| Advice needed on a Power Adapter | Hi..
I have a Freeview Box with a external Power Adapter which I plug into the back
Its 5v 1200m |
| Sell Instruments | Miko-Kings Instruments Ltd http://www.miko.com.hk
Miko-Kings Instruments Ltd., hereinafter called |
| XG-NV2SB Sharp LCD Projector power problem | The projector was dead. I replaced two electrolytic capacitors(one in the ballast section and the ot |
| [b:01851fc09f]vtech[/b:01851fc09f] thank you.
Till now I find only the datasheet for Weltrend IC bu |
| dp42sp | hi, im new here. I have a 42' plasma dawoo that broke yesterday. the bottom half of the screen wen |
| Lith. batteries have not been used for some time
Just looked at the schematic(in the archive if y |
| Sorry I have updated the links they are working now. I have not measured the voltage as I have not |
| Need help with testing TV components | Hi Everyone,
I have a 42" plasma TV that wont turn on. The little research Ive done points to |
| OK..tv is back to not wanting to turn on ...I removed the deflection board and have found that QH01 |
| What hot chassis is and how can I locate it??? | I am interested in repairing some electroinic stuffs such as TV and amplifier. However when I borro |
| use a 12volt AC to DC adaptor to charge a car battery? | I have an unused small black Uniross 12 volt adaptor that used to power an electronic piano. Both ou |
| Well I ended up finding the schematics and service manual for l01.1a which seems to be very very clo |