Subject | Text |
picture tube | this usually is a problem with the CRT on the picture tube..
try checking the CRT.. |
color picture tube philips tv 28pw6615/05 | [quote:fb52b1e838="Mel"]If you can find one, the picture tube will cost almost as much as the price |
|
another one | one more schematic here
[url]http://www.dekoder.hit.bg/dekoder.zip[/url] |
Pictuer tube rebuilding equipment | I am looking for picture tube rebuilding equipment,please email list and prices.
:)
Regard |
is it possible to repair 21 inch picture tube with broken he | is it possible to repair 21 inch picture tube with broken heating
The tv is Samsung and it is oper |
Compaq V75 Monitor starts then dies after one second | Hello friends,
I have 3 Compaq V75 monitors that have the same symptoms. When the power plug is con |
color picture tube philips tv 28pw6615/05 | Does any body know where I can buy a new color picture tube for a philips tv model 28pw6615/05 wides |
| Try to first resolder the picture tube socket . Review all the picture tube board for bad solders. I |
[b]SONY TV MDL# KV-27HFR Trinitron - No Picture after 45 Sec | [b:3b1fed15b4]Dear Admin,[/b:3b1fed15b4]
A bundle of thanks for such a wonderful Forum, I appreci |
my Bush tv don't display anything on the tube | hi
my Bush Tv powers on to stand by, and when you want it to light up the tube it can't, but u wi |
| Check this one [url]http://iiclabium.narod.ru/prj/reader2003/reader2.html[/url] |
IBM G51 no display | I encountered one IBM G51 (6541-02E) with no display and LED on the front panel on orange state.Anyo |
Service Manual for GoldStar GHV-1233p | Please can any one help me with a service manual for [b:2063d1c5cb][color=red:2063d1c5cb]GoldStar[/c |
need datasheet for upc1488m | Hello every one .Any one to help me find datasheet for upc1488M,it is a chip for vertical .THANKS IN |
36 in Samsung HDTV lost pix and power | my 36 in samsung hdtv (tube type not rear proj.), only 1 yr and 2 months old, lost pix and won't pow |
Won't Start - 3 clicks and out? | I have a 32" ProScan that started doing the same thing. When I click the ON button it sounds as if |
Vector Reserch | That's a lot of help Ray and Thanks for the help.I'll probably just proceed with the repairs as if t |
|
| Check out what Microchip says:
Note the following details of the code protection feature on Microch |
| Ok
So the resistance of the U31 Vin and Vout with everything connected I get 0hms.
With the A |
Replacement of C707 and e994 | Many thanks to folks in this forum. I began searching the internet to find a fix for my Hitachi TV. |
Re: philips l01.1e | [quote:ad5ed54760="terminator2k2"]hi all just wandering if some one could help me.?? i have a philip |
| Do you still have high voltage on the tube? (static sound when turning on/off the screen)
And are |
| http://free.bol.bg/mig31/index.htm - one more decoder here |
| change the 5.5 MHZ crysal in IF sound with one 6.0Mhz and if in output of sound IF ther is a coil ad |
updated | Hi
I have updated with nwe software , but its remain the same , after detecting new programs , goi |
video parlefoon | I am looking for the schematics for a JVM-400.The tube has no light.
thanks
françois (Belgium |
| yeah! tv still working but, always need to push the reset button in front. otherwise no signal with |
The Open Drain Output Troubles about STC12C5A | Good afternoon,sir
Recently I am involved in a project that controlling an analog switch--CD4066. H |
What to do with a digital clock | it gains 1 min/hour .
It has IC PCF1175CT and quartz, but no correction trimmer.
I have heard that |
philps hdd060 mp3- HELP | the ac/dc adaptor didnt work. (5v 2a output). philips wanted 50 quid for a new one, but i bought one |