| Subject | Text |
| Fujitsu plasmavision pds4229 - big power supply problem | Hello to all,
i have this plasma display after higher voltage in power line..
have someone sch |
| 50MP1 | Andy, I used to work for NEC and was the European Technical Specialist for Plasma displays. If your |
|
|
| In fact, I've bought this unit as faulty because I already bought one a few times ago and I've repai |
| Need Help - How to test boards in a plasma TV? | Hi Everyone,
I have a 42" plasma TV that wont turn on. The little research Ive done points |
| 50MP1 blank screen with backlight, green light stays on | Hi Plasma TV experts,
I have a 50MP1 that powers on, there is one bright color line show up on t |
| z-sus | Hi,
The IC itself has no printed anything.On the cooler are some numbers like
4921qp1002b,second l |
| Check the resistor on the flat cable from PCB to PDP module. When is resistor broken try change it. |
| Depending on the brand, they'll tell you the digital main, logic, and driver/e buffer boards. When y |
| Need help with testing TV components | Hi Everyone,
I have a 42" plasma TV that wont turn on. The little research Ive done points to |
| Welcome to plasma's. Seems with x/y disconnected VS and Va are ok indicating a good power supply. Ho |
| I have a JV50P, 50 inch plasma with built in jive suround sound. When i turn mine on, the light goe |
| [quote:30a24d7c00="Anonymous"]Hi,
These are out of warranty repairs, the PDP,s are fine as I have t |
| Phillips 42pf9966/37 | When I push power button on side of TV I hear a click as it tries to turn on. It had a bad fuse for |
| Same Problem | I have the exact same problem with my 50 in Samsung Plasma. I replaced the "Main Board" w |
| classic symptom of a failed pdp |
| Part for Plasma TV LG MZ-42PZ24 | Hello,
i need the following part for my Plasma TV:
Model: 42SD3
LGE PDP 020417
Board: 42S |
| Looking for a couple of Plasma TV boards | I'm trying to fix my plasma and need the following boards to do so:
SDBD 6871QDH067B
YSUS 6871 |
|
|
| Learning the curve... | [b:b3a96c42d5]I am an old tech, trying to catch-up with the new technologies
out there........
|
| PX-42VM3G | Hi Pinkwell,
No problem, Im not sure regarding sourcing of the service manual. All i can tell you |
| Plasma Screen SONY PFM 42B2E | Hello Everyone,
I was wondering if someone could help me out who has some knowledge on Presentati |
| Hi,
when I disconnect the two power connectors which goes to the PDP, it's still doing the same t |
| probably a faulty pdp, have a very close look at the screen, check for any blackened pixels. had the |
| Thanks for the reply gary. That's what I thought and it sucks :( I had another screen that is the sa |
| ASC20130528001 | I was wondering where you obtained a copy of the firmware noted in this service bulletin (ASC2013052 |
| Re: Another question | [quote:de20e5c1d6="Anonymous"]Sorry to sound dense - but the panel - is that the screen itself (and |
| I have bad experience with this PDP. Usually is bad PDP module |
| Sony KE-42TS2U | No LED. Plug in plasma and it turns on for 10 sec. then shuts off. |
| [quote:47f8d28098="Anonymous"]Although this is a simple repair and requires replacing the two conver |
| dead goodmans gtv42p | Hi i have a goodmans gtv42p which is stuck in stand by.It uses a sumsung pdp panel S42D-YD02. when p |
| Philips Plasma tv with Samsung PDA | I am have problems locating a manual with circuit diagrams for a plasma Plililps 42 PF9966/37 using |