| Subject | Text |
| Help me use a zener diode | I am attempting to understand how a zener diode would work in the following application:
This is |
| Re: Interlude IL60 | [quote:3742205c32="MiniZorg"][quote:3742205c32="TrevorPearman"]In case anybody cares
Fixed my Int |
|
|
| [quote:01deb7d12b="gary"]replace the internal memory backup battery, 1.2v or 2.4v depending on model |
| NSX-330 Aiwa mini system has problems | I have NSX-350M Aiwa bought used with non-functioning (??) CD changer.
This might help you-- |
| Re: Old MB Blaupunkt need code | [quote:e6ac263726="TPN"]Hello.
I have old merc with Blaupinkt radio.
There are two different numbe |
| Is it an original OEM toner or a refilled cartridge? |
| Ink for large format printer | hello everyone here
This is Maggie here,a sale from Highwellglobal company.Our company is one o |
| Re: RX-V650 power on-off problem | [quote:5833f81d08="elekos"]C405 capacitor is very important to proper standby voltage. Install new , |
| That depends on which kind of equipment it is and how the +5V rail is supplied.
Typically, a such f |
| The balanced connections use a shielded twisted pair cable, the two twisted conductors carry the ori |
| Panasonic Shockwave portable CD player... | Hey guys,
I'll be honest, when it comes to electronics, I'm lost. But I'm really hoping to fix my |
| Sony Vaio PCG-GRV516g Power jack broken | Hi i've done a quick search but can't seem to find an answer so thought i'd look here.
I have a Son |
| Trinitron has menu and sound, but fuzzy picture | Hello there everyone. I have a sony projection tv, model KP53V85, that went out of convergence a few |
| Ford 6000 CD series V | Regards, please help!
I need code for Ford 6000 CD Serial no. V100154
MPC, TMS 980 470R1VF288PZA
|
| canon mv800i won't load tape | Initially displayed error message "unload tape" (or similar).
Now will not load cassette |
| You need to reset or replace the chip on the cartridge.
[email protected] |
| Yes, right, it's likely to be the screen voltage wire. It's either that or a crt board ground. If y |
|
|
| And don't forget to check CRT's ground connection. |
| Intercom buzz | Lots of faults can cause buzz, but no ground or poor or corroded ground connections on shields is a |
| front cover on VUR 10 - it off! | ADD took control. Luckily I got it off without issue. the cable seems intact. Is it possible that |
| HELLP ! Open HP Laserjet 4L manual with .rar extension | Hello,
I am a new kid and stumbled across your web site .
My HP Laserjet 4L is on the fritz an |
| Samsung SCX-4725FN | I have a problem.
I got a Samsung SCX-4725FN with broken CRUM contacts, and the printer doesnt rea |
| Need schematic | Hi, I have a CD stacker in my car which has decided to not load/eject anymore...... The car is a 199 |
| PHILLIPS TV SPEAKERS | HELLO, To begin with the addition of speakers to a unit has to involve the understanding of the tot |
| sony mds-e11 | hello
can some body help me with a mini disk. the modell is sony MDS-E11
my trouble is at the back |
| [quote:df595ad10a="POUJO"]Thanks a bunch, that code was supplied on paper with the car but for some |
| TOSHIBA CX2886/CX2885C | Thankyou very much for the guidance/tips. According to your tips i have checked/changed the suspecte |
| You DID remove the shipping shorting strip after installation? |
| it's from cartridge. change drum. |
| SAMSUNG 1710 printer problem | Greetings, does anyone knows how can I write new firmware od reset ml-1710, I have a problem, when I |