Subject | Text |
NiMh charger | Hello,
I assume that you don't have the intension to load your cells at "quick rate", so let's sa |
| Not quite sure of the question, but here's the info;
In general, it is prefered to have an ESR me |
|
Canon AP-810III Typewriter User Manual | Hello,
I was wondering if anyone could tell me where to find or download a User Guide for a Canon |
| Can't tell what is suppose to look like but you need to be able to see some sort of a pulse. Remembe |
| Yes, I believe the speed is controlled by some magnetic wave or something like that.
The connecti |
| Applying basic Ohm's law;
Look at 73V source line below T3. Based on your reading at the collector |
SONY KV-2063R Television | I'm likely not the first to inquire into problems with this particular model of TV.
Here's a brief |
| The cinema series is basically enhanced sound. Back in 94 I’m guessing you paid at least $1200. Used |
Service Modes | Manufacturer Model Chassis Product Mode Enter
Akai CT-2119 CTV Test Mode
Simultaneous press + & |
| :idea: Found the following:
1) C951 = 4.7ufd/250V
2) Suggest changing these caps in standby po |
Sony u/s | Hey, puny earthling- I would suggest that the I.H.V.T is faulty( but could be s/c other comp, incl f |
| When inverter vendors talk about "modified sine wave", they usually mean a staircase wave. |
| Thanks for replying. The router still functions but only as a wireless local area network since it d |
Re: Looking for Samsung SV-5000W video head | [quote:27c9999426="vtech"]
WAIT...may not be the video head as it was a common problem with a lot o |
Samsung LED-LCD, pic freeze, works when tilted | I've just gotten one of those newfangled Series 8 55" with LED backlighting.
Basically, due |
Toshiba 61hx70 | Can'tadjust green to straight lines...no convergence in service mode. Can adjust red and blue. The |
| Solder up the verticle ic. Not cold joints, bad solder joints. Once and for all wave soldering sucks |
|
| A common cause for vertical scan faults in monitors is bad solder joints on the scan coils PCB. In p |
| Antique Electronics Supply in Tempe AZ US. I believe buys tubes, depending on what they want and mus |
Becker Traffic Pro | Hi guys,
i´ve forgotten the code from the car radio.
can someone help?
its a becker tr |
| [quote:f7cef08317="000andrzej"]At the and "44A" doesn't mean 44 Ampers. It's part of the name. You m |
| You have two opposing magnetic currents, and may burn out a winding or two. If you just wire them in |
RCA picture problem -- amateur desparate for help | I am a garbage man and one day on our route, a customer had given me a 37 inch RCA. He told me it h |
Re: Audi Gamma | [quote:7717963ee3="haka"]Code for Audi Gamma III (M327)
Blaupunkt auto radio
AUZ1Z3V3056207
7 647 |
Explanation or website for learning about RF and IF stages? | Hello everyone. Could someone either supply a good website address (I have tried Googling) or please |
Samsung SP42W5HFX Conversion Fault | I have been given a Samsung SP42W5HFX with a conversion fault.
I bought 2 IC chips and took the boa |
| [quote:4c377285c2="kezug"], but considering the mess (look at all the yellow oozing)...some have ooz |
| Big set of Moonraker 4 beams with a CB Radio running say...ah 110% modulation, swinging say 200 watt |
Phone PBX Executech mauals | I "bought" a manual from an ebay auction for a PBX system. Though the guy advertized it as an "origi |
| SI-3000 series are 5 legged adjustable regs with xtra control pins.
SI-3090's were typically used |