| Subject | Text |
| hi barry,
i am considering purchasing a 17md255v for my boat and have the same concern. it seems |
| 14 inch RCA TV Model 14F400T Help | Hi I am in need of the service manual data sheet Schematic for this TV
14 inch RCA TV Model 14F400 |
|
|
| I agree with Miguel. if your mixer has PAN controls just turn all of them to the same end so your ch |
| cpt101 | Q 330 is the muting transistor (KRC103) which goes faulty also change the jumper wire JW307 to a 47 |
| Ok, I took it apart, i'm guessing that the power supply board is the one that the power wire runs in |
| Hi G Money..
Are you conected to the correct terminal on the P.C.?? (Preferably "Line Out?")..If |
| ak19 | [b:d7090ddf95][i:d7090ddf95] :D firstl check the 2,2 ohms fusible for oc,(ew circuit),check c630 for |
| [quote:47de80044e="Anonymous"]Your CRT is getting a layer of dead material on the cathodes of each g |
| Intercom Question | Bogen.com makes a PCM2000 system that you can hook into a phone system but you will have to run wire |
| Ok - job done!
Thanks very much for putting me onto that website vtech, excellent information.
T |
| cable input | Remove the tv and replace it with another tv that you know works.To see if its the cable connection |
| I am not an expert but to my knowledge you probably won't get a shock from the flyback. The wire and |
| NAVIGATION GPS SYSTEM BMW E-39 SCHEME, MANUAL, WHATEVER | I am looking for a scheme for navigation to BMW E-39 model with TV model MK-2 or whatever... I have |
| dark picture | i tried the pot marked screen with no help. i was told that you can wrap a few turns of 18 GA wire a |
| Sorry my mistake, it's 3-3.5 ohm from that wire to ground on the amp pcb |
| JMBNO28WSS | :cry: :cry: [b:92398e8700][i:92398e8700]We have this model set which has had a burn up on the main |
| 1994 samsung CH-CKA50ZH model: CT--5315XVC screen blinking | my tv flashes/blinks after 5 seconds i turn on. i've noticed that if i lower the brightness setting |
|
|
| Re: Blown Fuse - Troubleshoot Why | [quote:dffa48c5b5="huntro1"]vtech,
Thanks for your reply! To answer your question, above G1 and G2 |
| sony trinitron, falt screen 32inch,where does this cable go? | I got a TV for free, it is brand new, but the screen does not work. I opened it up, and observe one |
| OK, fitted a new LOPT and arrrrrrrggh same problem. Lol well at least I've got a spare bush LOPT now |
| Electrical connections in humidifier | I have a Essick-Bemis H12 001 humidifier. It was in great need of a
thorough cleaning.......somehow |
| Yes, right, it's likely to be the screen voltage wire. It's either that or a crt board ground. If y |
| I have a set of led lights that go into my car and the wire isnt long enough. I opened them up to ex |
| no reception on my Sony KV-27S15 television | Hello Friends,
My mother recently gave a Sony KV-27S15 television. It was given to her brand new |
| Problems with turn signal lights on side view mirrors | I recently purchased after market chevron turn signal lights that go on my existing side view mirror |
| hhheeelllp with wiring up an electronic thermostat kit | im stupid when it coes to electronics so ill ask u guys and u email me ur responses cheers
its a |
| I haven't worked on a Proscan before but based on your description, it would be logical that your pr |
| I think you misunderstood me about the plug. The plug I was takling about is at the rear of the CRT |
| which wire does u mean?
regards |
| Help me use a zener diode | I am attempting to understand how a zener diode would work in the following application:
This is |