| File | Date | Descr | Size | Popular | Mfg | Model |
| � Celeron� Processor up to 1.1 GHz : Full Text Matches - Check >> |
| Found in: fulltext index (100) |
| GRFM1.pdf | 11/02/08 | The GRFM1 is 10 GHz to 20 GHz Frequency
multiplier designed on 2 um InGaP HBT process.
GRFM1 multiplies the input frequency from 10 GHz
to 20 GHz by the factor of 2 so as to produce the
output of 20 GHz to 40 GHz. Conversion gain of
frequency multipl | 41 kB | 136 | Rficsolutions Inc. | GRFM1 |
| Intel® Celeron® Processor up to 1.1 GHz.pdf | 28/06/22 | Intel Intel® Celeron® Processor up to 1.1 GHz.pdf | 2640 kB | 1 | Intel | ® Celeron® Processor up to 1.1 GHz |
| Intel® Pentium® III Processor in FC-PGA 1 GHz and Higher.pdf | 22/08/22 | Intel Intel® Pentium® III Processor in FC-PGA 1 GHz and Higher.pdf | 116 kB | 2 | Intel | ® Pentium® III Processor in FC-PGA 1 GHz and Higher |
| Intel® Pentium® III Processor Based on 0.13 Micron Process Up to 1.33 GHz Datasheet.pdf | 13/02/22 | Intel Intel® Pentium® III Processor Based on 0.13 Micron Process Up to 1.33 GHz Datasheet.pdf | 1513 kB | 1 | Intel | ® Pentium® III Processor Based on 0.13 Micron Process Up to 1.33 GHz Datasheet |
| Intel® Pentium® III Processor for the PGA370 Socket at 500 MHz to 1.13 GHz.PDF | 04/05/22 | Intel Intel® Pentium® III Processor for the PGA370 Socket at 500 MHz to 1.13 GHz.PDF | 1015 kB | 0 | Intel | ® Pentium® III Processor for the PGA370 Socket at 500 MHz to 1.13 GHz |
| GEDA01.pdf | 11/02/08 | The GEDA01 is 7.0 GHz to 20.0 GHz low power
single stage buffer amplifier. The amplifier is
designed using 2 μm InGaP HBT Technology for
high frequency applications.
Driver amplifier shows gain of 4.5 dB at 20 GHz with
power output of 9 dBm. It | 48 kB | 518 | Rficsolutions Inc. | The GEDA01 is 7.0 GHz to 20.0 GHz low power |
| Thermal Design Guide for the Intel® Pentium® III Processor with 512 Kbytes L2 Cache at 1.26 GHz.PDF | 20/05/22 | Intel Thermal Design Guide for the Intel® Pentium® III Processor with 512 Kbytes L2 Cache at 1.26 GHz.PDF | 712 kB | 0 | Intel | Thermal Design Guide for the ® Pentium® III Processor with 512 Kbytes L2 Cache at 1.26 GHz |
|
|
| GEDA02.pdf | 11/02/08 | The GEDA02 is 20 GHz to 40 GHz low power buffer
amplifier. The amplifier is designed using 2 μm
InGaP HBT process for high frequency applications.
Driver amplifier shows gain of 1dB at 40 GHz with
power output of 0dBm. It operates at 4.2Volts. | 44 kB | 278 | Rficsolutions Inc. | The GEDA02 is 20 GHz to 40 GHz low power buffer |
| GHZ.pdf | 25/06/20 | . Electronic Components Datasheets Passive components capacitors CDD G Gemcon 2006 Radial GHZ.pdf | 170 kB | 0 | Radial | GHZ |
| RGLNA11(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA11 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The device is designed for use in the 802.11a/b/g
and WLAN MIMO system.
The LNA covers a wide range of frequency from 2 to
6 GHz. The noise figure is 1.7 dB a | 126 kB | 55 | Rficsolutions.Inc | RGLNA11 |
| GRDA1.pdf | 11/02/08 | The GRDA1 is 10 GHz to 20 GHz differential
amplifier designed on 2 um InGaP HBT process.
The gain of GRDA1 is 5 dB typically with flatness of
±3dB over the entire bandwidth. Typical current
requirement for GRDA1 is 24 mA.
The one dB compression point | 46 kB | 75 | Rficsolutions Inc. | GRDA1 |
| RGLNA09(5.15-5.35 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGLNA09 is 5.15 to 5.35 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier .The
device is designed for 802.11a and WLAN MIMO
system.
The noise figure is 1.4 dB at 5.25 GHz. The
RGLNA09 i | 36 kB | 61 | Rficsolutions.Inc | RGLNA09 |
| RGLNA10(7.0-26.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA10 is 7.0-26.0 GHz; Low Noise
Distributed Amplifiers using GaAs pHEMT
Technology. The self-biased amplifier provides 19
dB of gain and 14 dBm of output power at P1 dB
gain compression while requiring only 86 mA from a
single 3.0 V supply.
G | 44 kB | 198 | Rficsolutions.Inc | RGLNA10 |
| RGLNA08(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA08 is 2.4 to 2.5 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11b/g and WLAN MIMO
system.
The noise figure is 1.5 dB at 2.4 GHz and die area
is | 77 kB | 64 | Rficsolutions.Inc | RGLNA08 |
|
|
| Back-fire.pdf | 20/10/05 | Antena wireless 2.4 Ghz | 208 kB | 1213 | Pacific | backfire 2.4 ghz |
| RGLNA03.pdf | 13/12/07 | broadband Low noise amplifier
2 GHz to 12 GHz | 114 kB | 98 | | |
| RGLNA02(2-6 GHz, 3V GaAs pHEMT).pdf | 13/02/08 | The RGLNA02 is 2.0 to 6.0 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11a/b/g and Wi-Fi
systems. It gives Power Output of 5 dBm at P1 dB.
The minimum no | 59 kB | 65 | Rficsolutions.Inc | RGLNA02 |
| RJVC02.pdf | 11/02/08 | RJVC02 is 2.0 - 6.0 GHz, voltage controlled
oscillator. It can operate at 1.8 V supply and
consumes only 1.0 mA current. The tuning
bandwidth of the oscillator is 4 GHz with good
phase noise performance. | 72 kB | 55 | Rficsolutions Inc. | RJVC02 is 2.0 - 6.0 GHz, voltage controlled |
| RJVC02.pdf | 11/02/08 | RJVC02 is 2.0 - 6.0 GHz, voltage controlled
oscillator. It can operate at 1.8 V supply and
consumes only 1.0 mA current. The tuning
bandwidth of the oscillator is 4 GHz with good
phase noise performance. | 72 kB | 52 | Rficsolutions Inc. | RJVC02 is 2.0 - 6.0 GHz, voltage controlled |
| RGLNA06(2-6 GHz,3.3 V GaAs pHEMT).pdf | 13/02/08 | The RGLNA06 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The MMIC Low Noise Amplifier doesn’t require any
off-chip component. The Broadband LNA is
designed for the 802.11a/b/g/n system.
The LNA covers a wide range o | 54 kB | 78 | Rficsolutions.Inc | RGLNA06 |