| File | Date | Descr | Size | Popular | Mfg | Model |
| marconi 2440 20 ghz microwave counter : Full Text Matches - Check >> |
| marconi 2440 20 ghz microwave counter : Forum Matches - Check >> |
| Found in: original (1) |
| marconi_2440_20_ghz_microwave_counter.pdf | 20/03/20 | Marconi marconi_2440_20_ghz_microwave_counter.pdf | 3394 kB | 10 | Marconi | marconi 2440 20 ghz microwave counter |
| Found in: fulltext index (38) |
| 5991-0753EN FieldFox RF and Microwave Combination Analyzers_252C 4 6.5 9 14 18 26.5 GHz - Product Fa | 03/07/21 | Agilent 5991-0753EN FieldFox RF and Microwave Combination Analyzers_252C 4 6.5 9 14 18 26.5 GHz - Product Fact Sheet c20140819 [2].pdf | 431 kB | 7 | Agilent | 5991-0753EN FieldFox RF and Microwave Combination Analyzers 252C 4 6.5 9 14 18 26.5 GHz - Product Fa |
| GRFM1.pdf | 11/02/08 | The GRFM1 is 10 GHz to 20 GHz Frequency
multiplier designed on 2 um InGaP HBT process.
GRFM1 multiplies the input frequency from 10 GHz
to 20 GHz by the factor of 2 so as to produce the
output of 20 GHz to 40 GHz. Conversion gain of
frequency multipl | 41 kB | 136 | Rficsolutions Inc. | GRFM1 |
| 2440.pdf | 01/09/22 | Marantz Öèôðû 2440 2440.pdf | 164 kB | 36 | Marantz | 2440 |
| N5247-90002 PNA Microwave Network 2-Port and 4-Port (10 MHz to 67 GHz) Data Sheet and Technical Spec | 16/07/21 | Agilent N5247-90002 PNA Microwave Network 2-Port and 4-Port (10 MHz to 67 GHz) Data Sheet and Technical Specifications [78].pdf | 3621 kB | 2 | Agilent | N5247-90002 PNA Microwave Network 2-Port and 4-Port (10 MHz to 67 GHz) Data Sheet and Technical Spec |
| PFM3000 TTI Freq Counter 1 to 3 ghz.pdf | 11/11/24 | 0 to 3 GHZ freq meter pdf | 413 kB | 3 | TTI | PFM3000 3000 |
| MARCONI6200A_Series_RF_Microwave_Test_Sets_Operating.pdf | 07/11/20 | Marconi MARCONI6200A_Series_RF_Microwave_Test_Sets_Operating.pdf | 13073 kB | 3 | Marconi | MARCONI6200A Series RF Microwave Test Sets Operating |
|
|
| GEDA01.pdf | 11/02/08 | The GEDA01 is 7.0 GHz to 20.0 GHz low power
single stage buffer amplifier. The amplifier is
designed using 2 μm InGaP HBT Technology for
high frequency applications.
Driver amplifier shows gain of 4.5 dB at 20 GHz with
power output of 9 dBm. It | 48 kB | 518 | Rficsolutions Inc. | The GEDA01 is 7.0 GHz to 20.0 GHz low power |
| GEDA02.pdf | 11/02/08 | The GEDA02 is 20 GHz to 40 GHz low power buffer
amplifier. The amplifier is designed using 2 μm
InGaP HBT process for high frequency applications.
Driver amplifier shows gain of 1dB at 40 GHz with
power output of 0dBm. It operates at 4.2Volts. | 44 kB | 278 | Rficsolutions Inc. | The GEDA02 is 20 GHz to 40 GHz low power buffer |
| 5500B_Manual.part2.rar | 11/10/08 | Ballantine Labs 5500B AutoMetronic Counter-Timer Manual. 5500B Counter Timer 5500B Frequency Counter. Similar to 5500A Counter-Timer 5500A Counter Timer. WinRAR self extracting archive 4 parts. 2008 October 11. | 2930 kB | 438 | Ballantine Laboratories | 5500B |
| GHZ.pdf | 25/06/20 | . Electronic Components Datasheets Passive components capacitors CDD G Gemcon 2006 Radial GHZ.pdf | 170 kB | 0 | Radial | GHZ |
| RGLNA11(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA11 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The device is designed for use in the 802.11a/b/g
and WLAN MIMO system.
The LNA covers a wide range of frequency from 2 to
6 GHz. The noise figure is 1.7 dB a | 126 kB | 55 | Rficsolutions.Inc | RGLNA11 |
| GRDA1.pdf | 11/02/08 | The GRDA1 is 10 GHz to 20 GHz differential
amplifier designed on 2 um InGaP HBT process.
The gain of GRDA1 is 5 dB typically with flatness of
±3dB over the entire bandwidth. Typical current
requirement for GRDA1 is 24 mA.
The one dB compression point | 46 kB | 75 | Rficsolutions Inc. | GRDA1 |
| ct125b-schematic.jpg | 03/03/12 | Ramsey CT-125 1 GHz frequency counter
schematic diagram | 293 kB | 492 | Ramsey | CT-125 |
|
|
| RGLNA09(5.15-5.35 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGLNA09 is 5.15 to 5.35 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier .The
device is designed for 802.11a and WLAN MIMO
system.
The noise figure is 1.4 dB at 5.25 GHz. The
RGLNA09 i | 36 kB | 61 | Rficsolutions.Inc | RGLNA09 |
| RGLNA10(7.0-26.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA10 is 7.0-26.0 GHz; Low Noise
Distributed Amplifiers using GaAs pHEMT
Technology. The self-biased amplifier provides 19
dB of gain and 14 dBm of output power at P1 dB
gain compression while requiring only 86 mA from a
single 3.0 V supply.
G | 44 kB | 198 | Rficsolutions.Inc | RGLNA10 |
| RGLNA08(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA08 is 2.4 to 2.5 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11b/g and WLAN MIMO
system.
The noise figure is 1.5 dB at 2.4 GHz and die area
is | 77 kB | 64 | Rficsolutions.Inc | RGLNA08 |
| Back-fire.pdf | 20/10/05 | Antena wireless 2.4 Ghz | 208 kB | 1213 | Pacific | backfire 2.4 ghz |
| RGLNA03.pdf | 13/12/07 | broadband Low noise amplifier
2 GHz to 12 GHz | 114 kB | 98 | | |
| RGLNA02(2-6 GHz, 3V GaAs pHEMT).pdf | 13/02/08 | The RGLNA02 is 2.0 to 6.0 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11a/b/g and Wi-Fi
systems. It gives Power Output of 5 dBm at P1 dB.
The minimum no | 59 kB | 65 | Rficsolutions.Inc | RGLNA02 |