| File | Date | Descr | Size | Popular | Mfg | Model |
| The GRV02 is 10 to 15 GHz; broadband VCO : Full Text Matches - Check >> |
| The GRV02 is 10 to 15 GHz; broadband VCO : Forum Matches - Check >> |
| The GRV02 is 10 to 15 GHz; broadband VCO : Found in chassis2model |
| Found in: original (1) |
| GRVO2.pdf | 11/02/08 | The GRV02 is 10 to 15 GHz; broadband VCO
designed on 2 um GaAs HBT Technology. The
resonator part is split on-chip inductor and off-chip
Varactor. The VCO consumes only 3.5 mA current
and the layout is very tiny.
The phase noise of the GEV03 can be i | 64 kB | 97 | Rficsolutions Inc. | GRV02 |
|
|
| Found in: fulltext index (99) |
| GEVO3.pdf | 11/02/08 | The GEV03 is 15 to 20 GHz broadband VCO
designed on 2 um GaAs HBT process. The device is
designed for high frequency applications. The
resonator part is split into on-chip inductor and offchip
varactor. The GEV03 consumes only 3.5 mA
current.
The ph | 44 kB | 67 | Rficsolutions Inc. | GEV03 |
| GRVO3.pdf | 11/02/08 | The GRV03 is 14 to 21 GHz: broadband Negative
Resistance Generator designed using 2 um HBT
Technology. The GRV03 consumes only 4 mA
current and the die area is very small.
The phase noise of the oscillator can be improved
using external high Q resona | 58 kB | 75 | Rficsolutions Inc. | GRV03 |
| RGLNA06(2-6 GHz,3.3 V GaAs pHEMT).pdf | 13/02/08 | The RGLNA06 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The MMIC Low Noise Amplifier doesn’t require any
off-chip component. The Broadband LNA is
designed for the 802.11a/b/g/n system.
The LNA covers a wide range o | 54 kB | 78 | Rficsolutions.Inc | RGLNA06 |
| RGLNA11(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA11 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The device is designed for use in the 802.11a/b/g
and WLAN MIMO system.
The LNA covers a wide range of frequency from 2 to
6 GHz. The noise figure is 1.7 dB a | 126 kB | 55 | Rficsolutions.Inc | RGLNA11 |
| RGLNA03.pdf | 13/12/07 | broadband Low noise amplifier
2 GHz to 12 GHz | 114 kB | 98 | | |
| RS03 _2_6GHz_Single stage_LNA_.pdf | 12/02/08 | The RS03 is 2 to 6 GHz; high efficiency Broadband
Single Stage Low noise amplifier, designed on 0.35-
μm SiGe BiCMOS technology. The device is
designed for use in the 802.11a/b/g and WLAN
MIMO system.
Functional Diagram .
The noise figure is 1. | 202 kB | 78 | Rficsolutions Inc. | RS03 |
|
|
| GRO1.pdf | 11/02/08 | The GRO1 is high performance 14-16 GHz oscillator
with off-chip resonator and it is designed on 2 um
InGaP HBT Technology.
It requires the High Q external resonator. The VCO
is taking only 3.5 mA current and the layout is very
small.
Functional Diag | 54 kB | 69 | Rficsolutions Inc. | GRO1 |
| GRFM1.pdf | 11/02/08 | The GRFM1 is 10 GHz to 20 GHz Frequency
multiplier designed on 2 um InGaP HBT process.
GRFM1 multiplies the input frequency from 10 GHz
to 20 GHz by the factor of 2 so as to produce the
output of 20 GHz to 40 GHz. Conversion gain of
frequency multipl | 41 kB | 133 | Rficsolutions Inc. | GRFM1 |
| GEDA01.pdf | 11/02/08 | The GEDA01 is 7.0 GHz to 20.0 GHz low power
single stage buffer amplifier. The amplifier is
designed using 2 μm InGaP HBT Technology for
high frequency applications.
Driver amplifier shows gain of 4.5 dB at 20 GHz with
power output of 9 dBm. It | 48 kB | 517 | Rficsolutions Inc. | The GEDA01 is 7.0 GHz to 20.0 GHz low power |
| GEDA02.pdf | 11/02/08 | The GEDA02 is 20 GHz to 40 GHz low power buffer
amplifier. The amplifier is designed using 2 μm
InGaP HBT process for high frequency applications.
Driver amplifier shows gain of 1dB at 40 GHz with
power output of 0dBm. It operates at 4.2Volts. | 44 kB | 276 | Rficsolutions Inc. | The GEDA02 is 20 GHz to 40 GHz low power buffer |
| GHZ.pdf | 25/06/20 | . Electronic Components Datasheets Passive components capacitors CDD G Gemcon 2006 Radial GHZ.pdf | 170 kB | 0 | Radial | GHZ |
| GRDA1.pdf | 11/02/08 | The GRDA1 is 10 GHz to 20 GHz differential
amplifier designed on 2 um InGaP HBT process.
The gain of GRDA1 is 5 dB typically with flatness of
±3dB over the entire bandwidth. Typical current
requirement for GRDA1 is 24 mA.
The one dB compression point | 46 kB | 75 | Rficsolutions Inc. | GRDA1 |
| RGLNA09(5.15-5.35 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGLNA09 is 5.15 to 5.35 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier .The
device is designed for 802.11a and WLAN MIMO
system.
The noise figure is 1.4 dB at 5.25 GHz. The
RGLNA09 i | 36 kB | 61 | Rficsolutions.Inc | RGLNA09 |
|
|
| RGLNA10(7.0-26.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA10 is 7.0-26.0 GHz; Low Noise
Distributed Amplifiers using GaAs pHEMT
Technology. The self-biased amplifier provides 19
dB of gain and 14 dBm of output power at P1 dB
gain compression while requiring only 86 mA from a
single 3.0 V supply.
G | 44 kB | 198 | Rficsolutions.Inc | RGLNA10 |
| RGLNA08(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA08 is 2.4 to 2.5 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11b/g and WLAN MIMO
system.
The noise figure is 1.5 dB at 2.4 GHz and die area
is | 77 kB | 64 | Rficsolutions.Inc | RGLNA08 |
| Back-fire.pdf | 20/10/05 | Antena wireless 2.4 Ghz | 208 kB | 1213 | Pacific | backfire 2.4 ghz |
| RGLNA02(2-6 GHz, 3V GaAs pHEMT).pdf | 13/02/08 | The RGLNA02 is 2.0 to 6.0 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11a/b/g and Wi-Fi
systems. It gives Power Output of 5 dBm at P1 dB.
The minimum no | 59 kB | 65 | Rficsolutions.Inc | RGLNA02 |
| RJVC02.pdf | 11/02/08 | RJVC02 is 2.0 - 6.0 GHz, voltage controlled
oscillator. It can operate at 1.8 V supply and
consumes only 1.0 mA current. The tuning
bandwidth of the oscillator is 4 GHz with good
phase noise performance. | 72 kB | 50 | Rficsolutions Inc. | RJVC02 is 2.0 - 6.0 GHz, voltage controlled |
| RJVC02.pdf | 11/02/08 | RJVC02 is 2.0 - 6.0 GHz, voltage controlled
oscillator. It can operate at 1.8 V supply and
consumes only 1.0 mA current. The tuning
bandwidth of the oscillator is 4 GHz with good
phase noise performance. | 72 kB | 55 | Rficsolutions Inc. | RJVC02 is 2.0 - 6.0 GHz, voltage controlled |