| File | Date | Descr | Size | Popular | Mfg | Model |
| rg : Found in chassis2model |
| rg : Found in repair tips |
| Found in: model (32) |
| RGMA 7052 z diagram.png | 06/09/18 | Schematics | 112 kB | 11 | Unica | RGMA 7052 z diagram |
|
|
| Rickenbacker-RG180pcb pwramp.pdf | 05/02/10 | guitar amplifier - PCB | 66 kB | 204 | Rickenbacker | RG180 |
| Rickenbacker-RG90_180 preamp.pdf | 05/02/10 | guitar amplifier | 172 kB | 133 | Rickenbacker | RG90, RG180 |
| Rickenbacker-RG7_15_30_60 guit preamp.pdf | 05/02/10 | guitar amplifier | 93 kB | 184 | Rickenbacker | RG7, RG15, RG30, RG60 |
| Randall-RG80_100 guit amp.pdf | 05/02/10 | guitar amplifier | 516 kB | 2317 | Randall | RG80, RG100 |
| RG-303Pro_manual_eng.pdf | 19/04/08 | User Manual for 4 Channel Power Supply | 2932 kB | 1570 | MC Voice | RG-303Pro |
| RGPA05(1.85-1.91 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGPA05 is a 1.85 to 1.91 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor MMIC power stage. This
power stage can be preceded by a Driver stage to
realize a complete amplifier.
It has been designed speciall | 118 kB | 126 | Rficsolutions.Inc | RGPA05 |
|
|
| RGPA04(4.9-5.9 GHz GaAs pHEMT).pdf | 13/02/08 | The RGPA04 is a 4.9 to 5.9 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor MMIC power amplifier.
The device is designed for 802.11a WLAN system.
The part is matched at the input and output so no
additional RF | 104 kB | 99 | Rficsolutions.Inc | RGPA04 |
| RGPA03(3.4-3.6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGPA03 is a 3.4 to 3.6 GHz high efficiency GaAs Enhancement mode psuedomorphic high electron mobility transistor MMIC Power Amplifier. It has been designed for use in the 3.5 GHz WiMax systems.
The part is matched at the input and output so no additi | 154 kB | 109 | Rficsolutions.Inc | RGPA03 |
| RGPA01(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGPA01 is a 2.4 to 2.5 GHz high efficiency
GaAs Enhancement Mode pHEMT MMIC power
amplifier. This MMIC power amplifier doesn’t require
any off chip components.
The device is designed for 802.11b/g and WLAN
MIMO system. The Power Amplifier exhibit | 69 kB | 137 | Rficsolutions.Inc | RGPA01 |
| RGLNA11(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA11 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The device is designed for use in the 802.11a/b/g
and WLAN MIMO system.
The LNA covers a wide range of frequency from 2 to
6 GHz. The noise figure is 1.7 dB a | 126 kB | 55 | Rficsolutions.Inc | RGLNA11 |
| RGLNA10(7.0-26.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA10 is 7.0-26.0 GHz; Low Noise
Distributed Amplifiers using GaAs pHEMT
Technology. The self-biased amplifier provides 19
dB of gain and 14 dBm of output power at P1 dB
gain compression while requiring only 86 mA from a
single 3.0 V supply.
G | 44 kB | 198 | Rficsolutions.Inc | RGLNA10 |
| RGLNA09(5.15-5.35 GHz GaAs pHEMT ).pdf | 13/02/08 | The RGLNA09 is 5.15 to 5.35 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier .The
device is designed for 802.11a and WLAN MIMO
system.
The noise figure is 1.4 dB at 5.25 GHz. The
RGLNA09 i | 36 kB | 61 | Rficsolutions.Inc | RGLNA09 |
| RGLNA08(2.4-2.5 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA08 is 2.4 to 2.5 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11b/g and WLAN MIMO
system.
The noise figure is 1.5 dB at 2.4 GHz and die area
is | 77 kB | 64 | Rficsolutions.Inc | RGLNA08 |
|
|
| RGLNA06(2-6 GHz,3.3 V GaAs pHEMT).pdf | 13/02/08 | The RGLNA06 is a broadband high efficiency GaAs
Enhancement mode pHEMT Low Noise Amplifier.
The MMIC Low Noise Amplifier doesn’t require any
off-chip component. The Broadband LNA is
designed for the 802.11a/b/g/n system.
The LNA covers a wide range o | 54 kB | 78 | Rficsolutions.Inc | RGLNA06 |
| RGLNA03(2-12 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA03 is 2.0 to 12.0 GHz high efficiency GaAs Enhancement mode p-HEMT Low noise amplifier .The device is designed for 802.11a/b/g standard.
The minimum noise figure achieved is 1.5 dB at 2 GHz. A single 3.5V and 12 mA current bias the LNA. No input | 114 kB | 92 | Rficsolutions.Inc | RGLNA03 |
| RGLNA02(2-6 GHz, 3V GaAs pHEMT).pdf | 13/02/08 | The RGLNA02 is 2.0 to 6.0 GHz high efficiency
GaAs Enhancement mode psuedomorphic high
electron mobility transistor Low noise amplifier. The
device is designed for 802.11a/b/g and Wi-Fi
systems. It gives Power Output of 5 dBm at P1 dB.
The minimum no | 59 kB | 65 | Rficsolutions.Inc | RGLNA02 |
| RGLNA01(0.7-3.0 GHz GaAs pHEMT).pdf | 13/02/08 | The RGLNA01 is 0.7 to 3.0 GHz high efficiency
GaAs Enhancement mode pHEMT Low Noise
Amplifier IP Block .The device is designed for use in
the IEEE 802.11b/g, PCS, PHS and Cellular system.
The die area of RGLNA01 is 0.8 mm x 0.7 mm, with
on chip input | 65 kB | 134 | Rficsolutions.Inc | RGLNA01 |
| RGDA01(2-6 GHz GaAs pHEMT).pdf | 13/02/08 | The RGDA01 is 2.0 to 6.0 GHz GaAs Enhancement
mode psuedomorphic high electron mobility
transistor Driver Amplifier. The device is designed
for IEEE 802.11a/b/g, WLAN standards and Cellular
system.
The driver amplifier can provide upto 20 dBm power
| 74 kB | 122 | Rficsolutions.Inc | RGDA01 |
| RGDIV01.pdf | 11/02/08 | RGDIV01 is a low noise divide by 8 static divider
utilizing InGaP HBT technology. The device
operates from 7 to 20 GHz. | 162 kB | 50 | Rficsolutions Inc. | RGDIV01 |