Text preview for : DF-063.pdf part of Kyocera DF-063 Kyocera Printer _OPTIONS DF-600 SERVICEBULLETIN DF-063.pdf
Back to : DF-063.pdf | Home
Service Bulletin
SB Number: SB DF-063 Creation Date: 12/06/2008
Subject: Note when replacing staple unit
Model: DF-600/610/650
Affected models: DF-600/610: KM-4530/5530/6330/7530, KM-C2630/2630D
DF-650: KM-6030/8030
Contents 1. Replace the stapler and staple clincher at the same time, since
the performance can not be guarantied if only one of the two is replaced.
Therefore both parts can only be ordered as a set (3B827020).
2. A special "jig" tool is necessary to replace the staple units.
Stapler (Driving staple section) Staple clincher (Bending of staple section)
Lower mount stapler Stapler Upper mount stapler Staple
303B807030 303B807350 clincher
Parts No. Parts No. Description Contents Remarks
1 3B827020 STAPLE UNIT STAPLER
STAPLE CLINCHER
2 3B868010 STAPLER ADJUSTMENT TOOL
3 303H368040 CARTRIDGE ADJUSTMENT TOOL DF-650 ONLY
Classification Entire stock rework In-field modification at next visit In-field modification by case X No modification necessary
Field measure Replace the stapler and the staple clincher at the same time.
See page 1-5-21 of the service manual for the stapler adjustment procedure.
KMIS Service Department, Kyocera Mita Europe Page of 8358 / SB DF-063