Kyocera DF-063 free download

File name DF-063.pdf

Service Bulletin SB Number: SB DF-063 Creation Date: 12/06/2008 Subject: Note when replacing staple unit Model: DF-600/610/650 Affected models: DF-600/610: KM-4530/5530/6330/7530, KM-C2630/2630D DF-650: KM-6030/8030 Contents 1. Replace the stapler and staple clincher at the same time, since the performance can not be guarantied if only one of the two is replaced. Therefore both parts can only be ordered as a set (3B827020). 2. A special "jig" tool is necessary to replace the staple units. Stapler (Driving staple section) Staple clincher (Bending of staple section) Lower mount stapler Stapler Upper mount stapler Staple 303B807030 303B807350 clincher Parts No. Parts No. Description Contents Remarks 1 3B827020 STAPLE UNIT STAPLER STAPLE CLINCHER 2 3B868010 STAPLER ADJUSTMENT TOOL 3 303H368040 CARTRIDGE ADJUSTMENT TOOL DF-650 ONLY Classification Entire stock rework In-field modification at next visit In-field modification by case X No modification necessary Field measure Replace the stapler and the staple clincher at the same time. See page 1-5-21 of the service manual for the stapler adjustment procedure. KMIS Service Department, Kyocera Mita Europe Page of 8358 / SB DF-063